e-Manual TopContentsHelpGlossary
Category
Top » Copy » Job Build

Category Top

Overview of This Function

Flow of Copy Operations

Canceling a Copy Job

Reserved Copying

Copy Sample

Recalling Previous Copy Jobs (Previous Settings)

Storing, Recalling, and Deleting Favorite Settings (Favorite Settings)

Storing Favorite Settings

Recalling and Deleting Favorite Settings

Assigning Shortcuts

Changing and Canceling Copy Settings

Interrupt Mode

Changing Basic Copy Ratios

Zoom by Length

Setting the X and Y Axes Independently

Paper Selection

Book→2 Pages

Two-Sided Copying

Collating Copies

Booklet Mode

Job Build

N on 1

Add Cover

Inserting Sheets

Different Size Originals

Adjusting Density Manually

Adjusting Background Density

Selecting the Original Type

Inserting Sheets When Copying Onto Transparencies

Adding a Secure Watermark

Document Scan Lock

Page Numbering

Copy Set Numbering

Adjusting the Image Sharpness

Erase Frame

Watermark Printing

Date Printing

Shifting the Original Image

Gutter Mode

Print & Check

Inverting Images (Nega/Posi)

Repeat Images

Merge Job Blocks

Job Done Notice

Mirror Image

Store in Mail Box

Superimpose Image

Cascade Copy

Various Features of the Express Copy Basic Features Screen

Operating the Express Copy Basic Features Screen

Setting Shortcuts on the Express Copy Basic Features Screen

Appendix

Collapse all|Expand all
Job Build
This mode enables you to scan multiple originals that are too many to be placed at once, by dividing them into multiple batches. You can use both the feeder and the platen glass for scanning. The originals are copied as one document after all of the batches have been scanned.
1.
Press [Copy].
2.
Press [Options] → [Job Build] → [Close].
3.
Press (Start).
NOTE
To cancel scanning, press [Stop] or (Stop).
4.
When scanning is complete, place your next batch of originals → press (Start).
If you want to change the scan settings for the next original, press [Change Settings]. If you want to change the settings, change them before pressing (Start).
You can press [Change Settings] to change the following settings:
Copy Ratio: Changing Basic Copy Ratios, Zoom by Length, and Setting the X and Y Axes Independently
2-Sided: Two-Sided Copying
Density: Adjusting Density Manually and Adjusting Background Density
Original Type: Selecting the Original Type
5.
After the last batch of originals is scanned, press [Start Copying].
IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart."
If you place your originals in the feeder, remove the originals from the original output area when the scanning of each batch is complete.
You can change only those settings appearing in [Change Settings] while in the Job Build mode. You need to specify the necessary copy settings in advance. However, if you specify [N on 1] with the Job Build mode, you cannot change the settings for [Copy Ratio] or [Density].
NOTE
If you want to place different size originals in the feeder, set [Different Size Originals]. (See "Different Size Originals.")
When you want to copy one-sided and two-sided originals as two-sided copies, set [1-Sided2-Sided] if the first original is one-sided and set [2-Sided2-Sided] if the first original is two-sided. Then manually set or cancel [2-Sided Original] for each batch of originals that you scan.