e-ManualTopSite mapHelp

Category Top

Overview of This Function

Registering Custom Paper Types

Changing the Name

Changing the Basis Weight

Changing the Size

Changing the Finishing Type

Changing the Type

Changing the Color

Setting the Second Side of Two-Sided Page

Adjusting the Creep (Displacement) Correction

Changing the Fiber Direction

Adjusting the Level of Curl Correction

Adjusting Fan Level for Paper Separation

Adjusting Paper Conveyance for 2-Sided Printing

Adjusting the Image Position

Correct Image Misalignment

Adjusting the Skew Correction Level of the Fed Paper

Correct Distortion (Parallelogram)

Correct Distortion (Trapezoid)

Adjusting the Zoom Ratio of the Image

Adjusting Left Edge Alignment of the Image

Adjusting Lead Edge Alignment of the Image

Automatically Correcting the Back Side Lead Edge Alignment of the Image

Adjusting Front/Back Side Edge Alignment of the Image by Scanning the Guide Sheet

Adjusting the Lead Edge/Tail End Margins

Adjusting the Total Amount of Toner

Adjusting the Secondary Transfer Voltage

Adjusting the Secondary Transfer Antistatic Bias

Adjusting the Image Clear Level of the ITB (Intermediate Transfer Belt)

Adjusting Secondary Transfer Belt Speed

Adjusting the Gloss and Fine Black

Adjusting the Saddle Stitch Position

Adjusting the Saddle Stitch Fold Placement

Adjusting the Saddle Fold Placement

Adjusting the Position of Punch Holes

Changing the Tail End White Patch Correction

Disabling Tail End Toner Correction

Adjusting the Primary Transfer Voltage

Adjusting Lead Edge Secondary Transfer Voltage

Deleting Custom Paper Types

Top » Paper Type Management » Adjusting the Secondary Transfer Voltage
Adjusting the Secondary Transfer Voltage
0S9Y-05W
You can adjust the Secondary Transfer Voltage (the voltage that transfers toner to the paper) when image blurring occurs.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
NOTE
Adjusting the Secondary Transfer Voltage may affect the settings in [Adjust ITB Image Clearing], [Corr. Tail End Toner Applic.], and [Adjust Image Position]. Readjust these settings, if necessary.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/ Edit].
4.
Press [Change] for <Adj. Secondary Transfer Volt.>
5.
Press [-] or [+] for front side and back side to adjust the voltage → [OK].
Adjustment in [-] Direction is Recommended for Following Cases
Adjustment in [+] Direction is Recommended for Following Cases
Paper Weight
Light (thin paper)
Heavy (thick paper)
Poor Images
Although the density in the high density areas is normal, tiny white spots may appear in the low density areas.
Density level is low in both high and low density areas.
White spots appear in high density areas.
Uneven glossy areas may occur in the high density images.
Paper surface is rough (such as textured paper), and white spots appear on the concave side.
Outlines in high density images may blur.
Enough toner is not applied in high density areas, and tiny dense spots appear.
-
6.
Press [OK].
Back to Top