e-ManualTopSite mapHelp

Category Top

Overview of This Function

Registering Custom Paper Types

Changing the Name

Changing the Basis Weight

Changing the Size

Changing the Finishing Type

Changing the Type

Changing the Color

Setting the Second Side of Two-Sided Page

Adjusting the Creep (Displacement) Correction

Changing the Fiber Direction

Adjusting the Level of Curl Correction

Adjusting Fan Level for Paper Separation

Adjusting Paper Conveyance for 2-Sided Printing

Adjusting the Image Position

Correct Image Misalignment

Adjusting the Skew Correction Level of the Fed Paper

Correct Distortion (Parallelogram)

Correct Distortion (Trapezoid)

Adjusting the Zoom Ratio of the Image

Adjusting Left Edge Alignment of the Image

Adjusting Lead Edge Alignment of the Image

Automatically Correcting the Back Side Lead Edge Alignment of the Image

Adjusting Front/Back Side Edge Alignment of the Image by Scanning the Guide Sheet

Adjusting the Lead Edge/Tail End Margins

Adjusting the Total Amount of Toner

Adjusting the Secondary Transfer Voltage

Adjusting the Secondary Transfer Antistatic Bias

Adjusting the Image Clear Level of the ITB (Intermediate Transfer Belt)

Adjusting Secondary Transfer Belt Speed

Adjusting the Gloss and Fine Black

Adjusting the Saddle Stitch Position

Adjusting the Saddle Stitch Fold Placement

Adjusting the Saddle Fold Placement

Adjusting the Position of Punch Holes

Changing the Tail End White Patch Correction

Disabling Tail End Toner Correction

Adjusting the Primary Transfer Voltage

Adjusting Lead Edge Secondary Transfer Voltage

Deleting Custom Paper Types

Top » Paper Type Management » Adjusting Fan Level for Paper Separation
Adjusting Fan Level for Paper Separation
0S9Y-057
You can adjust the fan level of the side fan and the overhead fan for the custom paper type. This setting is applied to the paper that is loaded in the POD Deck Lite-C1, POD Deck-D1,or Secondary POD Deck-D1.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
This adjustment for the fan level is not required since it is automatically adjusted by the main unit. However, the adjustment may prevent paper jam, multi-sheet feeding or corner fold.
The only adjustable setting for the POD Deck Lite-C1 is the side fan level.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/ Edit].
4.
Press [Change] for <Adj. Fan Level for Paper Sep.>.
5.
Press [-] or [+] to adjust <Side Fan> or <Overhead Fan> level → [OK].
You can also use the numeric keys to set the level.
Details of each item are shown below:
[-5] to [-1]:
Select when high-density areas are not printed evenly, or when the amount of curl is at an unusually high level due to a lack of moisture, paper characteristics, and variable humid conditions.
[0]:
The default setting.
[1] to [5]:
Select when paper jams occur frequently, or when the temperature and humidity are high.
6.
Press [OK].
Back to Top