e-ManualTopSite mapHelp

Category Top

Overview of This Function

Registering Custom Paper Types

Changing the Name

Changing the Basis Weight

Changing the Size

Changing the Finishing Type

Changing the Type

Changing the Color

Setting the Second Side of Two-Sided Page

Adjusting the Creep (Displacement) Correction

Changing the Fiber Direction

Adjusting the Level of Curl Correction

Adjusting Fan Level for Paper Separation

Adjusting Paper Conveyance for 2-Sided Printing

Adjusting the Image Position

Correct Image Misalignment

Adjusting the Skew Correction Level of the Fed Paper

Correct Distortion (Parallelogram)

Correct Distortion (Trapezoid)

Adjusting the Zoom Ratio of the Image

Adjusting Left Edge Alignment of the Image

Adjusting Lead Edge Alignment of the Image

Automatically Correcting the Back Side Lead Edge Alignment of the Image

Adjusting Front/Back Side Edge Alignment of the Image by Scanning the Guide Sheet

Adjusting the Lead Edge/Tail End Margins

Adjusting the Total Amount of Toner

Adjusting the Secondary Transfer Voltage

Adjusting the Secondary Transfer Antistatic Bias

Adjusting the Image Clear Level of the ITB (Intermediate Transfer Belt)

Adjusting Secondary Transfer Belt Speed

Adjusting the Gloss and Fine Black

Adjusting the Saddle Stitch Position

Adjusting the Saddle Stitch Fold Placement

Adjusting the Saddle Fold Placement

Adjusting the Position of Punch Holes

Changing the Tail End White Patch Correction

Disabling Tail End Toner Correction

Adjusting the Primary Transfer Voltage

Adjusting Lead Edge Secondary Transfer Voltage

Deleting Custom Paper Types

Top » Paper Type Management » Changing the Size
Changing the Size
0S9Y-050
You can change the size of the custom paper type.
NOTE
If you select the paper size which is different from the actual paper size, paper jams may occur, and the quality of the image may be adversely affected.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/ Edit].
4.
Press [Change] for <Size>.
5.
Select the paper size.
If you do not want to specify the paper size, press [No Settings].
If you want to select a standard paper size
If you want to select a custom paper size
If you want to select a standard paper size
Select a paper size from <Inch Size> → press [OK].
NOTE
To select an A or B series paper size, press [A/B Size].
If you want to select a custom paper size
Press [Custom Size].
Press [X] and [Y] → enter each value → press [OK].
You can use the numeric keys to enter values.
You can also select a size key ([S1] to [S5]) containing a stored paper size setting, instead of entering values.
You can register paper types by pressing [Register]. For more information on registering custom paper sizes, see "Registering/Editing/Deleting Custom Paper Sizes."
Press [OK].
6.
Press [OK].
Back to Top