e-ManualTopSite mapHelp

Chapter Top

Software That Can Be Used for Managing the Printer

Remote UI

Starting the Remote UI

Attention (Remote UI)
Enabling the Remote UI

Screen Layout of the Remote UI (Details on Each Setting Page)

Display/Change Message Board Messages and Support Links

FTP Client

NetSpot Device Installer

Managing Print Jobs

Attention (Job Manager)

Control Panel Setting

Attention (Control Panel Setting)

Setting Items

[Setup] Menu ([Control Menu] Options)

[Setup] Menu ([Paper Source] Options)

[Setup] Menu ([Network] Options)

[Setup] Menu ([Layout] Options)

[Setup] Menu ([Quality] Options)

[Setup] Menu ([Interface] Options)

[Setup] Menu ([User Maintenance] Options)

[Setup] Menu ([Print Mode] Options)

[Setup] Menu ([UFR II] Options)

[Setup] Menu ([PCL] Options)

[Setup] Menu ([Imaging] Options)

[Setup] Menu ([XPS] Options)

[Setup] Menu ([PDF] Options)

[Setup] Menu ([PS] Options)

[Setup] Menu ([MEAP Settings] Options)

[Setup] Menu ([Check Counter] Options)

[Utility Menu] Menu

[Job] Menu

[Reset] Menu

[Select Feeder] Menu

Checking the Number of the Printed Pages

Importing and Exporting Settings

Initializing the Settings

Initializing the [Setup] Menu Using the Printer's Control Panel

Checking the Printer Settings

Setting the Administrator Password

Specifying the Device Name or Administrator Information

Sleep Mode

Auto Shutdown

Printing Silently

Performing Printing Always with Silent Mode 

Performing Printing with Silent Mode during a Designated Time 

Specifying an ID for Each Department

Register/Update Software Function

Available Functions

Installing the System Options/MEAP Applications

Installing by Connecting This Printer to an Outside Network (Delivery)

Installing by Not Connecting This Printer to an Outside Network (Manual)

Downloading the Manuals and Related Software

Managing the Register/Update Software Function

Top » Managing the Printer » Auto Shutdown
Auto Shutdown
08X4-0UE
You can specify the settings for auto shutdown using the following procedure.
This setting is made using the Remote UI.
1
Start the Remote UI, and then log in as Administrator.
2
Click [Settings/Registration].
3
Select [Control Menu] from the [Preferences] menu.
4
Click [Edit...].
5
Specify the settings for auto shutdown.
(1)
Select the [Use Auto Shutdown Timer] check box.
The default setting is that it is disabled.
(2)
Specify the time to shut down in [Auto Shutdown Time].
NOTE
About the setting for the time to execute auto shutdown
When [Auto Shutdown Time] is changed during sleep mode, the specified time to execute auto shutdown becomes effective in the following cases.
When the printer is recovered from sleep
When the power of the printer is cycled
You can specify [Auto Shutdown Time] for auto shutdown with 1 hour increments between [After 1 hour] and [After 8 hours].
If you specify the setting for this option shorter than the default setting, this may shorten the life of the toner cartridges (the default setting is "4" hours).
If the printer is not turned OFF immediately
Depending on the process in the printer, it may take up to 10 minutes to turn the printer OFF.
6
Set the auto shutdown weekly function as needed.
(1)
Select the [Set Auto Shutdown Weekly Timer] check box.
(2)
Specify the day and time when to execute auto shutdown.
All the default settings are that it is disabled.
7
Click [OK].