e-ManualTopSite mapHelp

Chapter Top

Software That Can Be Used for Managing the Printer

Remote UI

Starting the Remote UI

Attention (Remote UI)
Enabling the Remote UI

Screen Layout of the Remote UI (Details on Each Setting Page)

Display/Change Message Board Messages and Support Links

FTP Client

NetSpot Device Installer

Managing Print Jobs

Attention (Job Manager)

Control Panel Setting

Attention (Control Panel Setting)

Setting Items

[Setup] Menu ([Control Menu] Options)

[Setup] Menu ([Paper Source] Options)

[Setup] Menu ([Network] Options)

[Setup] Menu ([Layout] Options)

[Setup] Menu ([Quality] Options)

[Setup] Menu ([Interface] Options)

[Setup] Menu ([User Maintenance] Options)

[Setup] Menu ([Print Mode] Options)

[Setup] Menu ([UFR II] Options)

[Setup] Menu ([PCL] Options)

[Setup] Menu ([Imaging] Options)

[Setup] Menu ([XPS] Options)

[Setup] Menu ([PDF] Options)

[Setup] Menu ([PS] Options)

[Setup] Menu ([MEAP Settings] Options)

[Setup] Menu ([Check Counter] Options)

[Utility Menu] Menu

[Job] Menu

[Reset] Menu

[Select Feeder] Menu

Checking the Number of the Printed Pages

Importing and Exporting Settings

Initializing the Settings

Initializing the [Setup] Menu Using the Printer's Control Panel

Checking the Printer Settings

Setting the Administrator Password

Specifying the Device Name or Administrator Information

Sleep Mode

Auto Shutdown

Printing Silently

Performing Printing Always with Silent Mode 

Performing Printing with Silent Mode during a Designated Time 

Specifying an ID for Each Department

Register/Update Software Function

Available Functions

Installing the System Options/MEAP Applications

Installing by Connecting This Printer to an Outside Network (Delivery)

Installing by Not Connecting This Printer to an Outside Network (Manual)

Downloading the Manuals and Related Software

Managing the Register/Update Software Function

Top » Managing the Printer » Control Panel Setting
Control Panel Setting
08X4-0A3
This section describes the menu operation for this printer.
Procedure for the Menu Operation
The menu consists of three hierarchies: "Option", "Item", and "Setting Value." Select the target options in each hierarchy.
As an example of the setting procedure, this section describes the procedure for setting [Drawer 1 Size] in the [Paper Source] to [B5]. Start the key operation from Step 1.
Before specifying the setting, see "Attention (Control Panel Setting)."
Operation Procedure
Key Operation
1
Place the printer offline.
Press [  ] (Online).
When the printer is online, the [Setup] menu can be displayed, however, the [User Maintenance] options cannot be specified.
2
Display the [Setup] menu.
Press [  ] (Settings).
The [Setup] menu is displayed.
3
Select the option.
When the [Paper Source] options are selected
Press [  ] or [  ].
The target option is displayed.
4
Display the item.
Press [OK].
The selected item is displayed.
5
Select the item.
When [Drawer 1 Size] is selected
Press [  ] or [  ].
The target item is displayed.
6
Select the item.
Press [OK].
The selected setting value is displayed.
7
Select the setting value.
When [B5] is selected
Press [  ] or [  ].
The target setting value is displayed.
8
Determine the selected setting value.
Press [OK].
The target setting value is specified.
The setting completion screen is displayed for 3 seconds. You can change the display time for the screen using [Set. Comp. Notify] in the [Setup] menu.
9
Go out of the setting menu.
Press [  ] (Online).
Printer Status to Enter the Menu Operation
You can enter each menu when the printer is in the following status.
 : You can enter the menu
 : You cannot enter the menu
When the printer is ready to print *1
When an error is occurring *2
When the printer is online
When the printer is offline
[Setup] Menu
 *3
[Select Feeder] Menu
[Reset] Menu
 *4
[Job] Menu
[Utility Menu] Menu
Application menu
*1
The printer is ready to print when the Ready indicator is on.
*2
An error is occurring in the printer when the Message indicator is on.
*3
The [User Maintenance] options cannot be specified.
*4
You cannot perform [Form Feed].
Back to Top