e-ManualTopSite mapHelp

Chapter Top

Software That Can Be Used for Managing the Printer

Remote UI

Starting the Remote UI

Attention (Remote UI)
Enabling the Remote UI

Screen Layout of the Remote UI (Details on Each Setting Page)

Display/Change Message Board Messages and Support Links

FTP Client

NetSpot Device Installer

Managing Print Jobs

Attention (Job Manager)

Control Panel Setting

Attention (Control Panel Setting)

Setting Items

[Setup] Menu ([Control Menu] Options)

[Setup] Menu ([Paper Source] Options)

[Setup] Menu ([Network] Options)

[Setup] Menu ([Layout] Options)

[Setup] Menu ([Quality] Options)

[Setup] Menu ([Interface] Options)

[Setup] Menu ([User Maintenance] Options)

[Setup] Menu ([Print Mode] Options)

[Setup] Menu ([UFR II] Options)

[Setup] Menu ([PCL] Options)

[Setup] Menu ([Imaging] Options)

[Setup] Menu ([XPS] Options)

[Setup] Menu ([PDF] Options)

[Setup] Menu ([PS] Options)

[Setup] Menu ([MEAP Settings] Options)

[Setup] Menu ([Check Counter] Options)

[Utility Menu] Menu

[Job] Menu

[Reset] Menu

[Select Feeder] Menu

Checking the Number of the Printed Pages

Importing and Exporting Settings

Initializing the Settings

Initializing the [Setup] Menu Using the Printer's Control Panel

Checking the Printer Settings

Setting the Administrator Password

Specifying the Device Name or Administrator Information

Sleep Mode

Auto Shutdown

Specifying an ID for Each Department

Register/Update Software Function

Available Functions

Installing the System Options/MEAP Applications

Installing by Connecting This Printer to an Outside Network (Delivery)

Installing by Not Connecting This Printer to an Outside Network (Manual)

Downloading the Manuals and Related Software

Managing the Register/Update Software Function

Top » Managing the Printer » Setting Items » [Setup] Menu ([Interface] Options)
[Setup] Menu ([Interface] Options)
07E3-0AF
NOTE
Table description
Bold values in the table indicate the default settings.
After changing the setting items with "*1", cycle the power of the printer or perform a hard reset to make the settings effective.
The setting items or setting values with "*2" may not be displayed depending on the availability of the optional accessories and other settings.
Setting Item
Setting Value
Setting
[Interface Selection]*1
[USB]: [Off], [On]
[Network]: [Off], [On]
[USB Storage Device]: [MEAP Driver]: [Off], [On]
Specifies the settings for the interfaces used for communication with the computer and so on.
You can specify [On] or [Off] for each interface.
[Timeout]
[Timeout]: [Off], [On]
[Timeout Time]*2: 5 to 15 to 300 seconds
Specifies the function to finish a job automatically.
[Connection Recog.]*1
[Off], [On]
When you print using the standard network, you may not obtain proper printout results. (Unreadable characters are printed, overlay printing fails, etc.) In this case, specify [Off] for this item.
[Extended RX Buffer]*1
[Off], [On]
If this item is set to [On], the memory capacity of the printer's receive buffer that receives the data is increased. You can speed up the time the computer exits when you send a large amount of data or complicated data from the computer.
Back to Top