e-ManualTopSite mapHelp

Chapter Top

Software That Can Be Used for Managing the Printer

Remote UI

Starting the Remote UI

Attention (Remote UI)
Enabling the Remote UI

Screen Layout of the Remote UI (Details on Each Setting Page)

Display/Change Message Board Messages and Support Links

FTP Client

NetSpot Device Installer

Managing Print Jobs

Attention (Job Manager)

Control Panel Setting

Attention (Control Panel Setting)

Setting Items

[Setup] Menu ([Control Menu] Options)

[Setup] Menu ([Paper Source] Options)

[Setup] Menu ([Network] Options)

[Setup] Menu ([Layout] Options)

[Setup] Menu ([Quality] Options)

[Setup] Menu ([Interface] Options)

[Setup] Menu ([User Maintenance] Options)

[Setup] Menu ([Print Mode] Options)

[Setup] Menu ([UFR II] Options)

[Setup] Menu ([PCL] Options)

[Setup] Menu ([Imaging] Options)

[Setup] Menu ([XPS] Options)

[Setup] Menu ([PDF] Options)

[Setup] Menu ([PS] Options)

[Setup] Menu ([MEAP Settings] Options)

[Setup] Menu ([Check Counter] Options)

[Utility Menu] Menu

[Job] Menu

[Reset] Menu

[Select Feeder] Menu

Checking the Number of the Printed Pages

Importing and Exporting Settings

Initializing the Settings

Initializing the [Setup] Menu Using the Printer's Control Panel

Checking the Printer Settings

Setting the Administrator Password

Specifying the Device Name or Administrator Information

Sleep Mode

Auto Shutdown

Specifying an ID for Each Department

Register/Update Software Function

Available Functions

Installing the System Options/MEAP Applications

Installing by Connecting This Printer to an Outside Network (Delivery)

Installing by Not Connecting This Printer to an Outside Network (Manual)

Downloading the Manuals and Related Software

Managing the Register/Update Software Function

Top » Managing the Printer » Managing Print Jobs » Attention (Job Manager)
Attention (Job Manager)
07E3-0A4
IMPORTANT
Deleting the print logs
The print logs are deleted by turning the printer OFF or performing a hard reset.
NOTE
About [Document Name]
A job file name of up to 32 characters can be displayed. If the file name has more than 32 characters, the characters after the limited number are not displayed.
Also, depending on the application, the application name may be added to the beginning of the file name.
About the job histories
The maximum numbers of the print logs that you can check are as follows. When the number of the jobs exceeds the maximum, the job histories are deleted starting from the oldest one.
[Print Job/Direct Print]: 48 (200 when SD card is installed)
[Stored Job]: 128 (only when SD card is installed)
[Report]: 16 (128 when SD card is installed)
[E-Mail Print]: 16 (128 when SD card is installed)
If the jog log display is not specified in [Display Job History] in the [Settings/Registration] - [Management Settings] - [Security] page, you cannot display the job histories.
 "Specifying the Setting for Job Log Display"
Back to Top