[Copies]

1 to 9999

Specifies the number of copies to be printed.

The printer prints the specified number of copies.

[Offset Y]/[Offset X]

-1.97 to 0.00 to +1.97 (in.)

Adjusts the printing position in the vertical direction (Y) or the horizontal direction (X) by the specified value.

[Binding Location]

[Long Edge], [Short Edge]

Specifies which edge of the paper, the long edge or short edge, is to be bound. When performing 2-sided printing, the printer adjusts the binding location automatically according to the paper surface.

[Gutter]

-1.97 to 0.00 to +1.97 (in.)

Specifies the gutter width for printing with the binding location created. A gutter is created with the image shifted by the specified value.

You can shift the image in the "+" direction with a positive value and in the "-" direction with a negative value.

[Alternative Method]

[Off], [On]

If this item is set to [On] and if the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the last page. (Printing can be performed faster than normal 2-sided printing.)

However, when performing 2-sided printing on punched paper or previously printed paper, the orientation or printing surface of the last page may differ from other pages. In this case, specify [Off].