e-ManualTopSite mapHelp

Chapter Top

Software That Can Be Used for Managing the Printer

Remote UI

Starting the Remote UI

Attention (Remote UI)
Enabling the Remote UI

Screen Layout of the Remote UI (Details on Each Setting Page)

Display/Change Message Board Messages and Support Links

FTP Client

NetSpot Device Installer

Managing Print Jobs

Attention (Job Manager)

Control Panel Setting

Attention (Control Panel Setting)

Setting Items

[Setup] Menu ([Control Menu] Options)

[Setup] Menu ([Paper Source] Options)

[Setup] Menu ([Network] Options)

[Setup] Menu ([Layout] Options)

[Setup] Menu ([Quality] Options)

[Setup] Menu ([Interface] Options)

[Setup] Menu ([User Maintenance] Options)

[Setup] Menu ([Print Mode] Options)

[Setup] Menu ([UFR II] Options)

[Setup] Menu ([PCL] Options)

[Setup] Menu ([Imaging] Options)

[Setup] Menu ([XPS] Options)

[Setup] Menu ([PDF] Options)

[Setup] Menu ([PS] Options)

[Setup] Menu ([MEAP Settings] Options)

[Setup] Menu ([Check Counter] Options)

[Utility Menu] Menu

[Job] Menu

[Reset] Menu

[Select Feeder] Menu

Checking the Number of the Printed Pages

Importing and Exporting Settings

Initializing the Settings

Initializing the [Setup] Menu Using the Printer's Control Panel

Checking the Printer Settings

Setting the Administrator Password

Specifying the Device Name or Administrator Information

Sleep Mode

Auto Shutdown

Specifying an ID for Each Department

Register/Update Software Function

Available Functions

Installing the System Options/MEAP Applications

Installing by Connecting This Printer to an Outside Network (Delivery)

Installing by Not Connecting This Printer to an Outside Network (Manual)

Downloading the Manuals and Related Software

Managing the Register/Update Software Function

Top » Managing the Printer » Initializing the Settings » Initializing the [Setup] Menu Using the Printer's Control Panel
Initializing the [Setup] Menu Using the Printer's Control Panel
07E3-0C7
Initialization of the [Setup] menu resets the settings specified in the common [Setup] menu and exclusive [Setup] menu to the default settings.
Initialize the settings by selecting [Initialize Menu] in the hierarchy of "Options" in the [Setup] menu. Start the key operation from Step 1.
IMPORTANT
Setting items which are not initialized
The following setting items are not initialized.
[Network] Options
[Adj. Start Position] ([User Maintenance] Options) 
If <Initialize failed.> is displayed
If the message <Initialize failed.> appears when the initialization of the [Setup] menu is executed, the [Setup] menu is not initialized.
Make sure that the Job indicator is off, and then perform [Initialize Menu] again.
Do not turn the printer OFF during the initialization.
The printer memory may be damaged.
About some setting items
Some setting items do not become effective unless you cycle the power of the printer or perform a hard reset after initializing the [Setup] menu.
NOTE
Canceling the initialization
If you press [  ] (Online) during the operation, the operation is canceled. However, you cannot cancel the operation when <Initializing...> is displayed even if you press [  ] (Online).
1
Press [  ] (Settings).
2
Select [Initialize Menu] using [  ] or [  ], and then press [OK].
3
Select [Yes] using [  ], and then press [OK]. 
→
While the initialization is being performed, <Initializing...> is displayed.
<Init. complete.> is displayed after the initialization is completed.
Back to Top