e-ManualTopSite mapHelp
Top » Paper Type Management » Adjusting the Fixing Speed
Adjusting the Fixing Speed
0L3X-0JC
When using long originals, paper which has absorbed moisture, or thin paper, the printed image may be distorted caused by paper feeding troubles. In this case, you may improve paper creasing and curled edges of paper by adjusting the fixing speed.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/Edit].
4.
Press [Change] for <Adjust Fixing Speed>.
5.
Press [-] or [+] to adjust the fixing speed → [OK].
NOTE
If the result is unsatisfactory even after pressing [+], press [-].
6.
Press [OK].
NOTE
If the condition is not improved even after adjusting the value in both [-] and [+] directions, the condition may be improved by adjusting the Fixing Pressure value.
Back to Top