e-ManualTopSite mapHelp
Top » Paper Type Management » Setting the Second Side of Two-Sided Page
Setting the Second Side of Two-Sided Page
0L3X-0HA
You can set whether the back side of the custom paper type is previously printed or not.
NOTE
If you set the information of the back side of the custom paper type incorrectly, paper jams may occur, and the quality of the image may be adversely affected.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].
3.
Select the paper type that you want to edit from the list → press [Details/Edit].
4.
Press [Change] for <2nd Side of 2-Sided Page>.
5.
Select [On] → press [OK].
If the back side of the paper is not previously printed, select [Off].
6.
Press [OK].
Back to Top