e-Manual TopContentsHelpGlossary
Category
Top » Problem Solving » Clearing Staple Jams (For Optional Products) » Saddle Stitcher Unit of the Booklet Finisher-G1

Category Top

Clearing Paper Jams

Locations of Paper Jams

Main Unit

Paper Sources

Paper Drawer

Cassette Feeding Unit-AF1 (Optional)

Paper Deck Unit-B2 (Optional)

Feeder

Staple Finisher-G1/Booklet Finisher-G1 (Optional)

Inside the Top Cover

Buffer Pass Unit-H1

External 2/3 Hole Puncher-B2

Booklet Finisher-G1 (Optional)

Inside the Front Cover

Saddle Stitcher Unit

Inner Finisher-D1 (Optional)

When the Inner 2/3 Hole Puncher-A1 Is Not Attached

When the Inner 2/3 Hole Puncher-A1 Is Attached

Inner 2Way Tray-H1 (Optional)

Reducing the Frequency of Paper Jams

Clearing Staple Jams (For Optional Products)

Locations of Staple Jams

Staple Finisher-G1/Booklet Finisher-G1

Saddle Stitcher Unit of the Booklet Finisher-G1

Inner Finisher-D1

If Memory Becomes Full during Scanning

Printer/Fax Driver Troubleshooting

Service Call Message

List of Error Messages

General

Fax

Scan and Send

Scan and Store/Access Stored Files

Quick Menu

Printer

Network

MEAP

User Setting Information Management

List of Error Codes without Messages

Collapse all|Expand all
Saddle Stitcher Unit of the Booklet Finisher-G1
Check the location of the staple jam, and follow the procedure described below, while referring to the directions that appear on the touch panel display, to remove the jammed staple.
IMPORTANT
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.
NOTE
The Booklet Finisher-G1 is an optional product.
1.
Open the front cover of the finisher.
2.
Pull out the saddle stitcher unit.
1. Grip the handle of the saddle stitcher unit, and pull out until it stops.
2. Pull the stapler unit of the saddle stitcher unit towards you, and then push it up.
3.
Pull out the staple case containing the jammed staples, holding it by its left and right sides.
4.
Push down the tab on the staple case.
1. Push down Part A to unlock.
2. Push up Part B.
5.
Remove any jammed staples.
1. Remove any jammed staples.
2. Return Part B to its original position.
6.
Return the staple case to its original position.
Push the staple case in until it clicks into place.
7.
Gently push the saddle stitcher unit back into its original position.
1. Pull the stapler unit towards you, and then push it down into its original position.
2. Grip the handle of the saddle stitcher unit, and return it to its original position.
CAUTION
When returning the saddle stitcher unit to its original position, be careful not to get your fingers caught, as this may result in personal injury.
8.
Close the front cover of the finisher.
CAUTION
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
NOTE
When you have cleared the staple jam, be sure to manually reposition the staples in the saddle stitcher unit. (See "Saddle Stitch Staple Repositioning.")