e-Manual TopContentsHelpGlossary
Category
Top » Problem Solving » Clearing Paper Jams » Inner Finisher-D1 (Optional) » When the Inner 2/3 Hole Puncher-A1 Is Not Attached

Category Top

Clearing Paper Jams

Locations of Paper Jams

Main Unit

Paper Sources

Paper Drawer

Cassette Feeding Unit-AF1 (Optional)

Paper Deck Unit-B2 (Optional)

Feeder

Staple Finisher-G1/Booklet Finisher-G1 (Optional)

Inside the Top Cover

Buffer Pass Unit-H1

External 2/3 Hole Puncher-B2

Booklet Finisher-G1 (Optional)

Inside the Front Cover

Saddle Stitcher Unit

Inner Finisher-D1 (Optional)

When the Inner 2/3 Hole Puncher-A1 Is Not Attached

When the Inner 2/3 Hole Puncher-A1 Is Attached

Inner 2Way Tray-H1 (Optional)

Reducing the Frequency of Paper Jams

Clearing Staple Jams (For Optional Products)

Locations of Staple Jams

Staple Finisher-G1/Booklet Finisher-G1

Saddle Stitcher Unit of the Booklet Finisher-G1

Inner Finisher-D1

If Memory Becomes Full during Scanning

Printer/Fax Driver Troubleshooting

Service Call Message

List of Error Messages

General

Fax

Scan and Send

Scan and Store/Access Stored Files

Quick Menu

Printer

Network

MEAP

User Setting Information Management

List of Error Codes without Messages

Collapse all|Expand all
When the Inner 2/3 Hole Puncher-A1 Is Not Attached
NOTE
If there is paper in the output tray, remove the output paper before proceeding with this procedure.
1.
Follow the instructions in "Main Unit" to remove any jammed paper.
2.
Remove any jammed paper protruding from the output tray.
3.
Open and close the front cover of the finisher.
1. Open the front cover.
2. Close the front cover.
CAUTION
When closing the front cover, be careful not to get your fingers caught, as this may result in personal injury.
4.
Follow the instructions on the screen.
NOTE
The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper jam is cleared.