Finished Stamp

The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals.

Vertical Placement

* Position at which stamp is applied

Horizontal Placement

* Position at which stamp is applied

IMPORTANT
Place your originals in the feeder. The finished stamp is applied to originals that are scanned from the feeder.

Press [Scan and Send].

Specify the destination → press [Options] → [Finished Stamp].

Press [Close].

NOTE
If the stamp does not print correctly, see "Replacing the Stamp Cartridge (Feeder)."