Specifying a File Server Using the Browse Key (Windows (SMB))

You can either specify a file server from a workgroup, or specify the domain name of an Active Directory Server on the machine.

Press [Scan and Send] → [New Destination].

Press [File].

Press the drop-down list → select [Windows (SMB)].

Press [Browse].

IMPORTANT
After turning the main power ON, you must wait for the time set in [Startup Settings] to elapse before pressing [Browse]. Network transmission is not possible until this startup time has elapsed. (See "Startup Time Settings.")

Select the desired workgroup.

You can also select the workgroup from a list of Active Directory server domain names registered in the machine, by pressing [Directory] from the drop-down list.

If you want to register a Directory server domain name, press [Register] → enter the domain name of the server.

NOTE
You can register up to five Directory servers. To edit a domain name, select the domain name that you want to edit → press [Edit]. To delete a domain name, select the domain name that you want to delete → press [Delete].

Select the desired file server → select the folder → press [OK].

To move up one level, press [Up].

If the Enter Network Password screen appears, enter you user name and password → press [OK].

To add another destination, press [Next Destination] → repeat steps 3 to 6.

IMPORTANT
You cannot search for a destination via an LDAP server if the time settings of the server and this machine are more than five minutes apart.

Press [OK].