 |
|
Function
|
Overview of the Function
|
|
Multi-purpose tray paper size
|
Specifies the size of the paper loaded in the multi-purpose tray.
|
|
Multi-purpose tray priority
|
Specifies whether the printer should detect the paper source in order starting with the multi-purpose tray.
|
|
Drawer N (N=1, 2, 3) size
|
Specifies the size of the paper loaded in the paper drawer (Drawer 1 or 2).
|
|
Standard paper size
|
Since paper size cannot be specified when printing from DOS, UNIX or other operating system, specify it using this setting.
|
|
Diff. paper tray
|
Specifies whether to use the multi-purpose tray when the paper settings for the selected paper source are not the same as the paper settings in the received data.
|
|
Auto selection
|
Specifies the paper source to be automatically selected.
|
|
Standard paper type
|
Since paper type cannot be specified when printing from DOS, UNIX or other operating system, specify it using this setting.
|
|
Adjust Print Position
|
Adjusts the printing position in the vertical direction (Y) or the horizontal direction (X).
|
|
Alternative method
|
If the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the last page.
|
|
Image Refinement
|
Set whether to use the smoothing process to print the jagged edges of text and graphics.
|
|
Recovery printing
|
Specifies whether to print the partially printed page when the printer stops printing due to a paper jam or an error occurring.
|
|
Check paper size
|
Specifies whether the printer should stop printing, displaying the message <Check paper size.> or continue printing.
|
|
Substitute size
|
The printer switches the paper size if the paper of the size to be used is not loaded in the printer.
|
|
Plain paper curl adjustment
|
If printed plain paper curls, specify the setting for this item.
|
