e-ManualTopSite mapHelp

Chapter Top

Checking Your Network Environment

Example of a Windows Network

Example of a Macintosh Network

Example of a UNIX Network

Example of a Network Using a Variety of Computers

Network Settings for the Printer (Common to Each Protocol)

Changing the Network Transmission Speed or Transfer Mode

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Setting the Spooling Function

Performing the Configuration Using the Printer's Control Panel (the Settings to Be Performed First)

Changing the Settings Using Web Browser (Remote UI)

Specifying the Setting for Startup Waiting Time

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Restricting the Users Who Can Monitor/Change the Settings Using the SNMP Protocol

Setting IEEE802.1X Authentication

Setting TLS Authentication Information

Setting TTLS/PEAP Authentication Information

Network Setting Items

Initializing the Network Settings

Initializing the Network Settings Using the Printer's Control Panel

Checking the MAC Address

Network Settings for the Printer (TCP/IP)

Setting the IP Address (IP v. 4)

Setting the IP Address Using the Printer's Control Panel

Setting the Printer to a Static IP Address
Determining Which IP Address to Assign to the Printer

Setting the IP Address Using the ARP/PING Commands

Setting the IP Address Using NetSpot Device Installer

Configuring the Protocol Settings

Attention (Protocol Settings)

Setting IP v. 6

Configuring a Computer that Performs Printing

Features of LPD

Features of RAW

Features of IPP/IPPS

Features of WSD

Connecting the Printer (LPD/RAW)

Values for Setting a Port

Connecting the Printer (IPP/IPPS)

Obtaining the Public Key for This Printer When Using SSL Encrypted Communication

Connecting the Printer (WSD)

Network Settings for the Printer (NetWare) 

Attention (NetWare Network Settings)

Configuring NetWare

Configuring the Protocol Settings

Network Settings for the Printer (SMB)

Attention (SMB Network Settings)

Configuring the Protocol Settings

Configuring a Computer that Performs Printing

Network Settings for the Printer (AppleTalk)

Macintosh Network Settings

Configuring the Protocol Settings

FTP Client (Macintosh)

Configuring a Computer that Performs Printing

Top » Configuring the Network Settings (Sharing the Printer) » Network Settings for the Printer (TCP/IP) » Configuring a Computer that Performs Printing » Connecting the Printer (IPP/IPPS)
Connecting the Printer (IPP/IPPS)
07E3-091
If You Are Using Windows Vista, 7 or Server 2008
If You Are Using Windows XP or Server 2003
If You Are Using Windows Vista, 7 or Server 2008
IMPORTANT
When using IPPS printing
You need to obtain the public key for this printer and install it on Windows Vista, 7 or Server 2008.
For details on the procedure for obtaining the public key, see "Obtaining the Public Key for This Printer When Using SSL Encrypted Communication."
NOTE
About the screenshots
This procedure is described using screenshots from Windows 7.
1
Confirm the setting for [IP Address Filter].
Make sure that the IP address of the computer on which the printer driver is installed is not restricted to print.
"Restricting the Users Who Can Print or Perform the Printer Settings"
IMPORTANT
If printing is restricted
You cannot install the printer driver.
If printing is restricted after the installation
If the IP address of the computer on which the printer driver is installed is restricted to perform printing in [Receive/Print Range Setting], you cannot print from the computer.
2
Open the printer folder.
"Basic Operations/Various Information for Windows"
3
Click [Add a printer].
4
Click [Add a network, wireless or Bluetooth printer].
5
Click [The printer that I want isn't listed].
6
Perform the following procedure.
(1)
Select [Select a shared printer by name].
(2)
Enter "http://<the IP address or name of the printer>/ipp."
When you want to perform IPPS printing using SSL encrypted communication, enter "https://<the IP address or name of the printer>/ipp."
(3)
Click [Next].
IMPORTANT
About IPPS
IPPS can be used only when the SSL encrypted communication function is enabled.
For details on the SSL encrypted communication function, see "Setting Keys and Certificates."
7
Click [Have Disk], and then specify the folder that contains the printer driver from the CD-ROM drive.
NOTE
When you are using the IPP authentication function
If you are asked to enter the password, enter the user name and password, and then click [OK].
For details on the settings for the IPP authentication function, see "Configuring the Protocol Settings."
8
Follow the on-screen instructions to install the printer driver.
If You Are Using Windows XP or Server 2003
1
Confirm the setting for [Receive/Print Range Setting].
Make sure that the IP address of the computer on which the printer driver is installed is not restricted to print.
"Restricting the Users Who Can Print or Perform the Printer Settings"
NOTE
If printing is restricted
You cannot install the printer driver.
If printing is restricted after the installation
If the IP address of the computer on which the printer driver is installed is restricted to perform printing in [Receive/Print Range Setting], you cannot print from the computer.
2
Open the printer folder.
"Basic Operations/Various Information for Windows"
3
Display [Add Printer Wizard].
Click [Add a printer].
Double-click [Add Printer].
4
Click [Next].
5
Select a printer type.
(1)
Select [A network printer, or a printer attached to another computer].
(2)
Click [Next].
6
Select the printer to be connected.
Select [Connect to a printer on the Internet or on a home or office network].
7
Enter [URL].
(1)
Enter "http://<the IP address or name of the printer>/ipp."
When you want to perform IPPS printing using SSL encrypted communication, enter "https://<the IP address or name of the printer>/ipp."
(2)
Click [Next].
IMPORTANT
About IPPS
IPPS can be used only when the SSL encrypted communication function is enabled.
For details on the SSL encrypted communication function, see "Setting Keys and Certificates."
8
Click [Have Disk], and then specify the folder that contains the printer driver from the CD-ROM drive.
NOTE
When you are using the IPP authentication function
If you are asked to enter the password, enter the user name and password, and then click [OK].
For details on the settings for the IPP authentication function, see "Configuring the Protocol Settings."
9
Follow the on-screen instructions to install the printer driver.
Back to Top