e-ManualTopSite mapHelp

Chapter Top

Checking Your Network Environment

Example of a Windows Network

Example of a Macintosh Network

Example of a UNIX Network

Example of a Network Using a Variety of Computers

Network Settings for the Printer (Common to Each Protocol)

Changing the Network Transmission Speed or Transfer Mode

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Setting the Spooling Function

Performing the Configuration Using the Printer's Control Panel (the Settings to Be Performed First)

Changing the Settings Using Web Browser (Remote UI)

Specifying the Setting for Startup Waiting Time

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Restricting the Users Who Can Monitor/Change the Settings Using the SNMP Protocol

Setting IEEE802.1X Authentication

Setting TLS Authentication Information

Setting TTLS/PEAP Authentication Information

Network Setting Items

Initializing the Network Settings

Initializing the Network Settings Using the Printer's Control Panel

Checking the MAC Address

Network Settings for the Printer (TCP/IP)

Setting the IP Address (IP v. 4)

Setting the IP Address Using the Printer's Control Panel

Setting the Printer to a Static IP Address
Determining Which IP Address to Assign to the Printer

Setting the IP Address Using the ARP/PING Commands

Setting the IP Address Using NetSpot Device Installer

Configuring the Protocol Settings

Attention (Protocol Settings)

Setting IP v. 6

Configuring a Computer that Performs Printing

Features of LPD

Features of RAW

Features of IPP/IPPS

Features of WSD

Connecting the Printer (LPD/RAW)

Values for Setting a Port

Connecting the Printer (IPP/IPPS)

Obtaining the Public Key for This Printer When Using SSL Encrypted Communication

Connecting the Printer (WSD)

Network Settings for the Printer (NetWare) 

Attention (NetWare Network Settings)

Configuring NetWare

Configuring the Protocol Settings

Network Settings for the Printer (SMB)

Attention (SMB Network Settings)

Configuring the Protocol Settings

Configuring a Computer that Performs Printing

Network Settings for the Printer (AppleTalk)

Macintosh Network Settings

Configuring the Protocol Settings

FTP Client (Macintosh)

Configuring a Computer that Performs Printing

Top » Configuring the Network Settings (Sharing the Printer) » Network Settings for the Printer (NetWare)  » Attention (NetWare Network Settings)
Attention (NetWare Network Settings)
07E3-095
IMPORTANT
Configuring a Computer that Performs Printing
After completing the NetWare network settings, configure each computer to be used for printing.
(1)
Connecting to an NetWare Network
Install NetWare client software on all the computers that perform printing, and then log in to the NetWare server or to the tree.
For details on the NetWare Network connection, see the instruction manual for NetWare or the operating systems.
(2)
Connecting the Printer
Install the printer driver using the procedure for installing the printer driver for a local area connection or network environment in "Printer Driver Installation Guide."
When you install the printer driver, select [Network printer] for the printer connection, and then select the print queue created in "Configuring NetWare."
If a screen for selecting a port appears during the installation, select [Network], and then click [Settings].
From the list, select the print queue created in "Configuring NetWare."
Back to Top