e-ManualTopSite mapHelp

Chapter Top

Checking Your Network Environment

Example of a Windows Network

Example of a Macintosh Network

Example of a UNIX Network

Example of a Network Using a Variety of Computers

Network Settings for the Printer (Common to Each Protocol)

Changing the Network Transmission Speed or Transfer Mode

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Setting the Spooling Function

Performing the Configuration Using the Printer's Control Panel (the Settings to Be Performed First)

Changing the Settings Using Web Browser (Remote UI)

Specifying the Setting for Startup Waiting Time

Performing the Configuration Using the Printer's Control Panel (When You First Set it Up)

Changing the Settings Using Web Browser (Remote UI)

Restricting the Users Who Can Monitor/Change the Settings Using the SNMP Protocol

Setting IEEE802.1X Authentication

Setting TLS Authentication Information

Setting TTLS/PEAP Authentication Information

Network Setting Items

Initializing the Network Settings

Initializing the Network Settings Using the Printer's Control Panel

Checking the MAC Address

Network Settings for the Printer (TCP/IP)

Setting the IP Address (IP v. 4)

Setting the IP Address Using the Printer's Control Panel

Setting the Printer to a Static IP Address
Determining Which IP Address to Assign to the Printer

Setting the IP Address Using the ARP/PING Commands

Setting the IP Address Using NetSpot Device Installer

Configuring the Protocol Settings

Attention (Protocol Settings)

Setting IP v. 6

Configuring a Computer that Performs Printing

Features of LPD

Features of RAW

Features of IPP/IPPS

Features of WSD

Connecting the Printer (LPD/RAW)

Values for Setting a Port

Connecting the Printer (IPP/IPPS)

Obtaining the Public Key for This Printer When Using SSL Encrypted Communication

Connecting the Printer (WSD)

Network Settings for the Printer (NetWare) 

Attention (NetWare Network Settings)

Configuring NetWare

Configuring the Protocol Settings

Network Settings for the Printer (SMB)

Attention (SMB Network Settings)

Configuring the Protocol Settings

Configuring a Computer that Performs Printing

Network Settings for the Printer (AppleTalk)

Macintosh Network Settings

Configuring the Protocol Settings

FTP Client (Macintosh)

Configuring a Computer that Performs Printing

Top » Configuring the Network Settings (Sharing the Printer) » Network Settings for the Printer (SMB) » Configuring a Computer that Performs Printing
Configuring a Computer that Performs Printing
07E3-09C
Configure all the computers to be used for printing so that they can be used on an SMB network.
Connecting to an SMB Network
1
Perform the following procedure.

From the [Start] menu, select [Control Panel], and then click [Network and Internet Connections] → [Network Connections].

From the [Start] menu, select [Control Panel], and then click [View network status and tasks] → [Manage network connections].
 
From the [Start] menu, select [Control Panel], and then click [View network status and tasks] → [Change adapter settings].

From the [Start] menu, select [Control Panel] → [Network Connections] → [Local Area Connection].

From the [Start] menu, select [Control Panel], double-click [Network and Sharing Center], and then click [Manage network connections].
2
Display the [Local Area Connection Properties] dialog box.
   
Right-click the [Local Area Connection] icon, and then select [Properties] from the pop-up menu.

Click [Properties].
 If the [User Account Control] dialog box appears
Click [Yes] or [Continue].
3
Make sure that the check boxes for the following options are selected.
[Client for Microsoft Networks]
[Internet Protocol Version 4 (TCP/IPv4)] (or [Internet Protocol (TCP/IP)])
If the check boxes are not selected, select them.
4
Double-click [Internet Protocol Version 4 (TCP/IPv4)] (or [Internet Protocol (TCP/IP)]).
5
Click [Advanced] in the [General] tab.
6
Enable NetBIOS over TCP/IP.
(1)
Display the [WINS] tab.
(2)
Select [Enable NetBIOS over TCP/IP].
(3)
Click [OK].
7
Continue to click [OK] until all the dialog boxes close.
 If a message that prompts you to restart the computer appears
Restart the computer.
Installing the Printer Driver
A printer driver is required for printing. Following "Printer Driver Installation Guide", install the printer driver.
For details on the procedure for viewing "Printer Driver Installation Guide", see "Installation."
NOTE
If the screen that prompts you to select a port appears during the installation
Perform the following procedure.
1.
Click [Add Port].
2.
Select [Network], and then click [OK].
3.
From the list, select [Workgroup Name], [Server Name], and [Printer Name] specified in "Configuring the Protocol Settings" respectively.
Back to Top