e-ManualTopSite mapHelp

Category Top

Preventing Unauthorized Access

Increasing Security

Restricting Access by Authentication

Administrator Settings

Specifying the System Manager Settings

Department ID Management

Specifying Department ID Management

Checking/Printing/Clearing Page Totals

Accepting Jobs with Unknown Department IDs

Accepting B&W Copy and Print Jobs without Entering a Department ID

User Setting Information Management (User Setting Information Management Service)

Logging In to the User Setting Information Management Service Page

Deleting the User Setting Information

Authentication Method Settings for Sending Operations

Specifying Personal Folders

Registering Personal Folders for Each User

Setting Up the Home Folder and Personal Folders

Registering Folders Designated by Login Service as Personal Folders

Specifying Authentication Method for LDAP Server

Specifying Authentication Method for Rights Management Server

Specifying Authentication Method for SMTP Server

Specifying Authentication Method for File Server

Simple Authentication Settings for Secure Print

Setting to Disable Integrated Authentication

Network Security

Key Pair and Server Certificate Settings for Encrypted SSL Communication

Generating a Key Pair and Server Certificate

Registering a Key Pair File and Server Certificate File Installed from a Computer

Editing Key Pairs and Server Certificates

Registering/Editing a CA Certificate File

Verifying Certificate Validity Using Certificate Revocation List

Using an Encryption Method That Complies with FIPS 140-2

MEAP Settings

Using the SSL

Printing Installed Application Information

Preventing Information Leakage

Digital Signatures

Setting/Confirming a Key Pair and Device Certificate

Confirming a Key Pair and User Certificate

Checking a Device Signature/User Signature Certificate

Setting a Rights Management Server

Copy Set Numbering Options

Accepting Only Encrypted Secure Printing

Restricting the Send Function

Setting the Address Book

Mail Box Settings

Specifying Settings for All Mail Boxes

Specifying the Mail Box Security Settings

Setting the Control Panel Display

Specifying Management Settings for the Hard Disk

Completely Erasing Unnecessary Data from the Hard Disk

Initializing All Data/Settings

TPM Settings

Device Management

Using the USB Port

Device Information Settings

Specifying Device Information Delivery Settings

Registering/Deleting/Printing Delivery Destinations

Setting Automatic Delivery

Setting Manual Delivery

Setting the Receiving Machine

Checking/Printing the Communication Log

Setting SSO-H Authentication for Device Information Delivery Settings

Limiting Functions

Remote UI

Clearing the Message Board

ACCESS MANAGEMENT SYSTEM

Retrieving Audit Logs

Saving a Log of Key Operations

Available Administrator Settings Table (Touch Panel Display)

IEEE 2600 Security Standard

Top » Security » Setting to Disable Integrated Authentication
Setting to Disable Integrated Authentication
0L3X-250
You can restrict the whole Integrated Authentication functions, regardless of authentication method settings. If you disable Integrated Authentication, entering the authentication information is required in specific operations as using login information of the machine for other authentication will be restricted.
The specific operations are as follows:
Sending to personal folders
Sending to an LDAP server
Sending to a file server
Using other functions which support Integrated Authentication
To disable integrated authentication method, it is necessary to access and then log in to the machine from a Web browser. This section describes the procedure for accessing the machine from the portal page of the Remote UI.
IMPORTANT
If you disable Integrated Authentication, an authentication error may occur when sending files to personal folders. If you want to disable Integrated Authentication while specifying the personal folders under the home folder, make sure to register authentication information for each user.
You can specify the personal folder settings in [Personal Folder Specification Method] in [Function Settings] (Settings/Registration). For more information, see "Specifying Personal Folders."
NOTE
For information whether the login service or other services you are using support Integrated Authentication, contact your local authorized Canon dealer.

1.
Start your Web browser → enter the following URL in the address bar.
http://<IP address of the machine or host name>
The [Login] page is displayed.
2.
Select [System Manager Mode] → enter <System Manager ID:> and <System Manager PIN:> → click [Log In].
If the Department ID Management or authentication for SSO-H is set, enter the necessary items for each log in.
3.
Click [Shared Credential Management Service] on the Remote UI portal page.
4.
Select the item for <Setting to Disable Integrated Authentication> → click [Update].
Details of each item are shown below:
[Disable integrated authentication]:
Disable integrated authentication function, regardless of the authentication method.
[Disable integrated authentication using credentials for local device authentication]:
Disable integrated authentication when using authentication method of local device authentication.
[Disable integrated authentication using credentials for LDAP server authentication]:
Disable integrated authentication when using authentication method of LDAP server authentication.
IMPORTANT
Changes to the settings are enabled after the machine is restarted.