e-Manual TopContentsHelpGlossary
Category
Top » Network Settings

Category Top

Basic Network Settings

Switching the Connection Method to Wireless LAN or Wired LAN

Connecting to Wired LAN

Attention (Connecting to a Wired LAN)

Connecting to Wireless LAN

Attention (Security when using a wireless LAN product)

Setting the Machine Using WPS (Push Button Mode)

Setting the Machine Using WPS (PIN Code Mode)

Entering the PIN Code in the Wireless LAN Router/Access Point

Setting by Manually Selecting an Access Point

Setting by Manually Entering SSID

Checking the SSID or Network Key of the Wireless LAN Router/Access Point
Attention (Connecting to a Wireless LAN)

Setting the IP Address

Setting the IPv4 Address

Attention (Setting the IPv4 Address)

Setting the IPv6 Address

Attention (Setting the IPv6 Address)

Checking IP Address Settings

Attention (Confirming IP Address Settings)

Checking the Network Connection

Attention (Checking the Network Connection)

Setting Up Your Computer to Print and Send Faxes (Windows Only)

Selecting the Connection Method (LPD/RAW/WSD)

Configuring Printer Settings on Your Computer

Attention (Configuring Printer Settings on Your Computer)

Setting the Machine to Be Able To Send Scanned Documents

Activating the Send Setting Utility

Configuring E-Mail Send Settings

How to Save to a File Server (A Shared File Server)

Setting Up the File Server (Shared Folder) (Windows)

Checking the Computer Settings
Setting Up a Shared Folder
Windows 2000/Server 2003 Sharing Settings
Windows XP Sharing Settings
Windows Vista/Server 2008 Sharing Settings
Windows 7/Server 2008 R2 Sharing Settings

Setting Up the File Server (Shared Folder) (Macintosh)

Setting Up the File Server (File Sharing) (UNIX/Linux)

Additional Network Settings

Setting the Speed and Duplex

Specifying a Delay Before Establishing the Network Connection

Setting IPv4 DNS

Setting IPv6 DNS

Attention (DNS Settings)

Setting the WINS Server

Setting the SMB

Setting MTU Size

Managing the Machine

Check Wireless LAN Information

Checking the MAC Address

Collapse all|Expand all
Network Settings
07K4-0FF
This chapter describes how to configure the network settings on the machine.
You can configure the machine to obtain an IP address automatically, without needing to specify any network settings to establish a network connection. Note that you may need to specify these settings, depending on your network type.
Network Settings, such as IP Address, LPD, RAW and WSD (other than IEEE802.1X settings) are the same for both wired LAN and wireless LAN.
Configuring a network
To learn about connecting and settings, see
"Basic Network Settings."
For switching between wired LAN and wireless LAN, see
"Switching the Connection Method to Wireless LAN or Wired LAN."
For connecting to a network, see
"Connecting to Wired LAN" or "Connecting to Wireless LAN."
For setting IP addresses, see
"Setting the IPv4 Address" or "Setting the IPv6 Address."
For checking connections, see
"Checking the Network Connection."
Setting Scan TX Function Settings
To learn about setting options, see
"Setting the Machine to Be Able To Send Scanned Documents ."
To learn about activating the Send Setup Utility, see
"Activating the Send Setting Utility."
To learn how to send scanned documents by e-mail, see
"Configuring E-Mail Send Settings."
To learn how to send scanned documents to a file server, see
"How to Save to a File Server (A Shared File Server)."
Specifying the settings for printing/sending faxes from a computer
To learn about the operating environment, see
"Setting Up Your Computer to Print and Send Faxes (Windows Only)."
To learn how to specify LPD, RAW and WSD settings on the machine, see
"Selecting the Connection Method (LPD/RAW/WSD)."
To learn how to specify LPD and RAW settings (on the computer), see "Configuring Printer Settings on Your Computer."
Specifying additional network settings
See the following sections.
Managing the machine with a Web browser
Checking Wireless LAN Information
Checking the address of this machine
Checking the MAC address of the machine