e-Manual TopContentsHelpGlossary
Category
Top » Network Settings » Setting the Machine to Be Able To Send Scanned Documents » Activating the Send Setting Utility

Category Top

Basic Network Settings

Switching the Connection Method to Wireless LAN or Wired LAN

Connecting to Wired LAN

Attention (Connecting to a Wired LAN)

Connecting to Wireless LAN

Attention (Security when using a wireless LAN product)

Setting the Machine Using WPS (Push Button Mode)

Setting the Machine Using WPS (PIN Code Mode)

Entering the PIN Code in the Wireless LAN Router/Access Point

Setting by Manually Selecting an Access Point

Setting by Manually Entering SSID

Checking the SSID or Network Key of the Wireless LAN Router/Access Point
Attention (Connecting to a Wireless LAN)

Setting the IP Address

Setting the IPv4 Address

Attention (Setting the IPv4 Address)

Setting the IPv6 Address

Attention (Setting the IPv6 Address)

Checking IP Address Settings

Attention (Confirming IP Address Settings)

Checking the Network Connection

Attention (Checking the Network Connection)

Setting Up Your Computer to Print and Send Faxes (Windows Only)

Selecting the Connection Method (LPD/RAW/WSD)

Configuring Printer Settings on Your Computer

Attention (Configuring Printer Settings on Your Computer)

Setting the Machine to Be Able To Send Scanned Documents

Activating the Send Setting Utility

Configuring E-Mail Send Settings

How to Save to a File Server (A Shared File Server)

Setting Up the File Server (Shared Folder) (Windows)

Checking the Computer Settings
Setting Up a Shared Folder
Windows 2000/Server 2003 Sharing Settings
Windows XP Sharing Settings
Windows Vista/Server 2008 Sharing Settings
Windows 7/Server 2008 R2 Sharing Settings

Setting Up the File Server (Shared Folder) (Macintosh)

Setting Up the File Server (File Sharing) (UNIX/Linux)

Additional Network Settings

Setting the Speed and Duplex

Specifying a Delay Before Establishing the Network Connection

Setting IPv4 DNS

Setting IPv6 DNS

Attention (DNS Settings)

Setting the WINS Server

Setting the SMB

Setting MTU Size

Managing the Machine

Check Wireless LAN Information

Checking the MAC Address

Collapse all|Expand all
Activating the Send Setting Utility
07K4-0HL
Prepare to use the Send Setting Utility.
This section describes how to activate the Send Setting Utility.
You can use one of the following activation methods.
"Activating via the [Send Setup Tool]"
"Activating from a Web browser"
IMPORTANT
Before using the Send Setting Utility
Check the IP address of the machine.
"Checking IP Address Settings"
Ask your network administrator when you are not sure of the IP address of the machine.
System Requirements
Windows
Operating System
Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
Web browser
Microsoft Internet Explorer 7.0 or later
Activating via the [Send Setup Tool]
Activate the Send Setup Utility using the Send Setup Tool provided on the User Software CD-ROM.
The Send Setup Tool
The Send Setup Tool supports the following system environments.
Operating system
Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
Microsoft Windows Server 2003
Microsoft Windows Server 2008
Display
SVGA Monitor that supports at least 256 colors
Screen resolution set to at least 800 x 600 pixels
1
Insert the User Software CD-ROM into the slot on your computer.
2
Click [Send Function Setting Tool].
3
Click [Next].
4
Check that the device list is displayed on the machine and click [Next].
If the device list is not displayed on the machine:
(1)
Click [Search Again] or [Search by IP Address].
When you click [Search Again], proceed to (3).
(2)
Enter the IP address of the machine and click [OK].
(3)
Check that the device list is displayed on the machine and click [Next].
If multiple devices are displayed in the list:
(1)
Select the machine from the device list and click [OK].
5
Make sure the settings and then click [OK].
Activating from a Web browser
1
Start a Web browser.
2
Enter "http://<IP address of the machine>/sendsupport_login.html" in the address field, and press the [ENTER] key on the keyboard.
Input Example: http://192.168.0.215/sendsupport_login.html