Tone Settings
Pressing on the control panel enables you to set various tones to sound, according to the operations performed or status of the device.
You can set whether to sound the following audible tones. The tones below sound at the following times:
Entry Tone:
When pressing keys on the control panel or keys on the touch panel display. 
Invalid Entry Tone:
When you press an invalid key on the control panel or touch panel display, or when the maximum number of characters is exceeded.
Restock Supplies Tone:
When the toner cartridge needs to be replaced.
Energy Saver/Sleep Tone:
When the machine goes in the Energy Saver Mode/Sleep mode.
Error Tone:
When a malfunction occurs (e.g., paper jam or operational error).
Job Done Tone:
After a job completes.
Forgot Original Tone:
When placing originals in the feeder while an original remains on the platen glass, or vice versa.
1.
Press on the control panel.
2.
Specify each setting → press [OK].
» Basic Operations » Tone Settings
0S9Y-01K