e-ManualTopSite mapHelp

Category Top

Optional Equipment and System Requirements

Printing from a Computer

Using E-Mail/I-Fax

Sending Data

Checking Your Network Environment

Network Environment Setup Procedures

Connecting the Machine to a Computer or Network

Specifying Network Settings from the Touch Panel Display

Interface Settings

Communication Environment Setup

IEEE 802.1X Authentication Settings

Selecting the IEEE 802.1X Authentication Method

TCP/IP Network Setup Procedures

Protocol Settings

TCP/IPv4 Settings

TCP/IPv6 Settings

Settings Common to TCP/IPv4 and TCP/IPv6

Confirming TCP/IPv4 Settings (PING Command)

Confirming TCP/IPv6 Settings (PING Command)

Setting the Key Pair Used With SSL Encrypted Communications

IPSec Settings

Registering a Security Policy
Editing a Security Policy

Setting the Waiting Time for Connection at Startup

Setting Up a Computer for Printing

Printer Connection Method (LPD/Raw)

Windows XP/Server 2003/Server 2008/Vista/7/Server 2008 R2/8/Server 2012
Mac OS X 10.5 - 10.8
UNIX

Printer Connection Method (IPP/IPPS)

Printer Connection Method (FTP)

Printer Connection Method (WSD)

Setting Up a Computer as a File Server

FTP Server Settings

WebDAV Server Settings

NetWare Network Setup Procedures

NetWare Print Service Settings

Setup Using NetWare Administrator or PCONSOLE

Protocol Settings

Setting Up a Computer for Printing

SMB/CIFS Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network

Printer Connection Method

Setting Up a Computer as a File Server

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network and Configuring a Shared Folder

AppleTalk Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing

Network Connection Problems and Remedies

Printing Problems and Remedies

Data Sending/File Sharing Problems and Remedies

Encrypted SSL Data Communication Problems and Remedies

Confirming Settings

Checking the Block Log

Obtaining the Public Key of the Machine to Use SSL with Windows Server 2008/Vista/7/Server 2008 R2/8/Server 2012

Top » Network » SMB/CIFS Network Setup Procedures » Setting Up a Computer for Printing » Printer Connection Method
Printer Connection Method
0L3X-1Y8
Windows XP/Server 2003/Server 2008/Vista/7/Server 2008 R2/8/Server 2012
1.
The procedure for checking whether the IPv4 address of the computer to install the driver in is allowed in the [Firewall Settings] of the machine is described in steps 13 to 14 of "TCP/IPv4 Settings."
IMPORTANT
If communication via the relevant IPv4 address is not permitted in [Firewall Settings], you cannot install the driver.
After you have installed the driver, if communication via the IPv4 address of the computer you have installed it on is not permitted in [Firewall Settings], you cannot print from that computer.
2.
Install the driver.
Install the driver according to the following procedures indicated in the manual for the driver:
If you want to use the UFR II/PCL/PS printer driver:
See the procedure for standard installation in the Printer Driver Installation Guide.
When the dialog box for selecting the port appears during installation, select [Network]. From the list, select [Workgroup Name], [Server Name], and [Printer Name] you set in "SMB and WINS Settings."
Mac OS X 10.3.9/10.4/10.5/10.6
If you use a PS printer driver provided by Apple Inc. with the Mac OS, you can use SMB as the print application. After installing the PPD file according to "Printing from a Computer (Mac OS)," specify the print settings according to the instructions in the documentation provided with your Macintosh.

NOTE
If you are using Windows Vista, a dialog box may appear while you are performing the procedure. In this case, enter a user name and password. For more information, see the manuals provided with the operating system.