Protocol Settings - Canon imagePRESS C800/C700/C60 e-Manual

Protocol Settings

This section describes how to specify the protocol settings for the machine using the control panel. If you are configuring the settings for the first time, use the control panel of the machine.

After configuring the settings, you can change them using software other than the control panel of the machine. For more information, see "Settings/Registration Table."

TCP/IPv4 Settings

TCP/IPv6 Settings

Settings Common to TCP/IPv4 and TCP/IPv6

Confirming TCP/IPv4 Settings (PING Command)

Confirming TCP/IPv6 Settings (PING Command)

Setting the Key Pair Used With SSL Encrypted Communications

IPSec Settings

Setting the Waiting Time for Connection at Startup

IMPORTANT
When using functions to access external servers on the internet, you may not be able to access them due to the settings of firewalls, etc. In this case, consult the administrator for the network you are using. If you are using the imagePRESS Server, see the manual provided with the imagePRESS Server. If you are using the imagePRESS Server, some functions are not available with this machine. For details, see the manual provided with the imagePRESS Server.

IMPORTANT

When using functions to access external servers on the internet, you may not be able to access them due to the settings of firewalls, etc. In this case, consult the administrator for the network you are using.

If you are using the imagePRESS Server, see the manual provided with the imagePRESS Server.

If you are using the imagePRESS Server, some functions are not available with this machine. For details, see the manual provided with the imagePRESS Server.