e-ManualTopSite mapHelp
Top » Basic Operations » Checking the Counter and Controller Version
Checking the Counter and Controller Version
0UKW-01E
You can check the print page counts, and the print page counts for each MEAP application.
You can also check the version of the controller.
1.
Press (Counter Check) on the control panel.
NOTE
Each item of the counter is counted under the following conditions.
Depending on the settings performed by the local authorized Canon dealer, the following counter may not be displayed or counter not listed below may be displayed.
Number
Counter Name
Counted Items
Counted Number per One Printed Sheet
Job Type
Color Mode
One-Sided
Two-Sided
101
Total 1
All Print Jobs
Full Color/Single Color/Two Colors/Black
1
2
102
Total 2
All Print Jobs
Full Color/Single Color/Two Colors/Black
1
2
108
Total (Black 1)
All Print Jobs
Black
1
2
109
Total (Black 2)
All Print Jobs
Black
1
2
113
Total (Black/Small)
All Print Jobs
Black
1
2
114
Total 1 (2-Sided)
All Print Jobs
Full Color/Single Color/Two Colors/Black
0
1
123
Total (Full Color + Single Color/Small)
All Print Jobs
Full Color/Single Color/Two Colors
1
2
2.
Check the following.
To check the counter report:
To check the MEAP counter:
To check the controller version or installed options:
To check the counter report:
Press [Print List].
Press [Yes].
To check the MEAP counter:
Press [Check MEAP Counter].
Select the desired application from the <Application Name:> drop-down list.
To check the version information of an application, the MEAP Contents version information, etc., press [Version Information].
Press [OK].
To check the controller version or installed options:
Press [Chk. Device Config.].
Press [OK].
3.
Press [OK].
Back to Top