e-Manual TopContentsHelpGlossary
Category
Top » Network Settings » Basic Network Settings » Connecting to Wireless LAN » Setting the Machine Using WPS (PIN Code Mode)

Category Top

Basic Network Settings

Switching the Connection Method to Wireless LAN or Wired LAN

Connecting to Wired LAN

Attention (Connecting to a Wired LAN)

Connecting to Wireless LAN

Attention (Security when using a wireless LAN product)

Setting the Machine Using WPS (Push Button Mode)

Setting the Machine Using WPS (PIN Code Mode)

Entering the PIN Code in the Wireless LAN Router/Access Point

Setting by Manually Selecting an Access Point

Setting by Manually Entering SSID

Checking the SSID or Network Key of the Wireless LAN Router/Access Point
Attention (Connecting to a Wireless LAN)

Setting the IP Address

Setting the IPv4 Address

Attention (Setting the IPv4 Address)

Setting the IPv6 Address

Attention (Setting the IPv6 Address)

Checking IP Address Settings

Attention (Confirming IP Address Settings)

Checking the Network Connection

Attention (Checking the Network Connection)

Setting Up Your Computer to Print and Send Faxes (Windows Only)

Selecting the Connection Method (LPD/RAW/WSD)

Configuring Printer Settings on Your Computer

Attention (Configuring Printer Settings on Your Computer)

Setting the Machine to Be Able To Send Scanned Documents

Activating the Send Setting Utility

Configuring E-Mail Send Settings

How to Save to a File Server (A Shared File Server)

Setting Up the File Server (Shared Folder) (Windows)

Checking the Computer Settings
Setting Up a Shared Folder
Windows 2000/Server 2003 Sharing Settings
Windows XP Sharing Settings
Windows Vista/Server 2008 Sharing Settings
Windows 7/Server 2008 R2 Sharing Settings

Setting Up the File Server (Shared Folder) (Macintosh)

Setting Up the File Server (File Sharing) (UNIX/Linux)

Additional Network Settings

Setting the Speed and Duplex

Specifying a Delay Before Establishing the Network Connection

Setting IPv4 DNS

Setting IPv6 DNS

Attention (DNS Settings)

Setting the WINS Server

Setting the SMB

Setting MTU Size

Managing the Machine

Check Wireless LAN Information

Checking the MAC Address

Collapse all|Expand all
Setting the Machine Using WPS (PIN Code Mode)
07K4-0FW
Enter the PIN code generated by the machine to wireless LAN routers and/or access points for connection.
1
Switch the connection method to wireless LAN.
"Switching the Connection Method to Wireless LAN or Wired LAN"
2
Press [] (Menu).
3
Select <Network Settings> using [] or [], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
4
Select <Wireless LAN Settings> using [] or [], and then press [OK].
5
Press [OK].
6
Select <WPS PIN Code Mode> using [] or [], and then press [OK].
7
Select <Yes> using [], and then press [OK].
8
Within 10 minutes, use the computer to enter the PIN code displayed on the screen into the wireless LAN router or access point.
"Entering the PIN Code in the Wireless LAN Router/Access Point"
For details on PIN code entry methods, see the instruction manual provided with the wireless LAN router or access point you are using.
If "Cannot find Access Point" appears, press [OK] to close the screen, and follow the procedure from Step 6 again.
9
Make sure the Wi-Fi indicator blinks.
When the wireless LAN router or access point is detected, the Wi-Fi indicator blinks.
The next screen is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights.
When the message appears, press [OK] to close the screen and follow the procedure again from Step 6.
If you cannot detect the access point after retrying, see the following:
"Onscreen Messages"
10
Wait until the machine sets the IP address automatically (approx. 2 min).
If you want to set the IP address manually, see the following.
"Setting the IPv4 Address"
"Setting the IPv6 Address"