Loading Paper into a Paper Drawer

If the selected paper runs out, or the selected paper drawer runs out of paper while printing, a screen prompting you to load paper appears on the touch panel display.

Follow the procedure below to load paper into the paper drawers.

CAUTION
When handling paper, take care not to cut your hands on the edges of the paper.

IMPORTANT
A screen prompting you to load paper also appears if the selected paper drawer is not fully inserted into the machine. Make sure that the paper drawer is properly in place. Do not load the following types of paper into the paper drawers. Doing so may cause a paper jam. Severely curled or wrinkled paper Thin straw paper Paper which has been printed on using a thermal transfer printer The reverse side of paper which has been printed on using a thermal transfer printer Make sure that you fan the sheets of paper well before placing them. Recycled paper, pre-punched paper, and heavy paper should be fanned particularly well before loading it. Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams. When you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)

IMPORTANT

A screen prompting you to load paper also appears if the selected paper drawer is not fully inserted into the machine. Make sure that the paper drawer is properly in place.

Do not load the following types of paper into the paper drawers. Doing so may cause a paper jam.

Severely curled or wrinkled paper

Thin straw paper

Paper which has been printed on using a thermal transfer printer

The reverse side of paper which has been printed on using a thermal transfer printer

Make sure that you fan the sheets of paper well before placing them. Recycled paper, pre-punched paper, and heavy paper should be fanned particularly well before loading it.

Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams.

When you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)

NOTE
Envelopes can be loaded into Paper Drawer 2 only if the Envelope Cassette-E1 is attached. Paper Drawers 2, 3 and 4 can only be used if the Cassette Module-AA1 is attached. For information on paper that can be loaded, see "Available Paper Stock." If a message prompting you to load paper appears while printing, the remaining prints are automatically made after you load the correct paper. If you select a different paper drawer, the remaining prints are made after you press [OK]. Press [Cancel] to cancel printing.

NOTE

Envelopes can be loaded into Paper Drawer 2 only if the Envelope Cassette-E1 is attached.

Paper Drawers 2, 3 and 4 can only be used if the Cassette Module-AA1 is attached.

For information on paper that can be loaded, see "Available Paper Stock."

If a message prompting you to load paper appears while printing, the remaining prints are automatically made after you load the correct paper. If you select a different paper drawer, the remaining prints are made after you press [OK].

Press [Cancel] to cancel printing.

Open the paper drawer.

	1. Press the open button on the paper drawer in which you want to load paper.
	2. Grip the handle, and pull out the paper drawer until it stops.

Prepare the paper to load.

Open the packaging for the paper, and remove the paper stack.

NOTE
For high-quality printouts, use paper recommended by Canon. Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.

Load the paper stack into the paper drawer.

	1. Make sure that the paper size setting of the paper drawer matches the size of the paper to load in the paper drawer.
	2. Load the paper stack against the right wall of the paper drawer.
	3. Gently push the paper drawer back into the machine until it clicks into place in the closed position.

CAUTION
When returning the paper drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury.

IMPORTANT
Paper which is curled must be straightened out before loading it into the paper drawer. You will not be able to make copies or print if you load paper that exceeds the loading limit mark (), or if the paper drawer is not completely pushed into the machine. Make sure that the height of the paper stack does not exceed the loading limit mark (). Always check that the paper drawers are in place.

NOTE
Each paper drawer holds about 550 sheets of paper (21 lb bond (80 g/m2)) If there are instructions on the paper package about which side of the paper to load, follow those instructions. When the paper is loaded into the paper drawer, the side facing up is the one printed on. If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it. For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see "Relationship Between the Original Orientation and Paper Orientation." Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight. If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded. If you print on the paper which has absorbed moisture, steam may come out from the output area of the machine. This is because the moist on the paper evaporates when the high temperature is applied when a toner is fixed to the paper. It is not a malfunction. (This especially happens in low room temperature.)

NOTE

Each paper drawer holds about 550 sheets of paper (21 lb bond (80 g/m2))

If there are instructions on the paper package about which side of the paper to load, follow those instructions.

When the paper is loaded into the paper drawer, the side facing up is the one printed on.

If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reloading it.

For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see "Relationship Between the Original Orientation and Paper Orientation."

Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.

If paper runs out and printing is stopped, load a new paper stack. Printing restarts after the new paper stack is loaded.

If you print on the paper which has absorbed moisture, steam may come out from the output area of the machine. This is because the moist on the paper evaporates when the high temperature is applied when a toner is fixed to the paper. It is not a malfunction. (This especially happens in low room temperature.)