N on 1 - Canon imageRUNNER ADVANCE 4051/4045/4035/4025 e-Manual

N on 1

This mode enables you to scan multiple originals or two-sided originals and arrange them on one sheet of paper. You can select 2, 4, or 8 scanned originals to arrange on the page. You can also set two-sided printing and change the layout and order of images.
The originals are reduced automatically to fit the specified copy size.

2 On 1

This setting reduces two 1-sided originals or one 2-sided original to fit on one side of a sheet of paper.

4 On 1

This setting reduces four 1-sided originals or two 2-sided originals to fit on one side of a sheet of paper.

8 On 1

This setting reduces eight 1-sided originals or four 2-sided originals to fit on one side of a sheet of paper.

IMPORTANT
This mode is only available for storing files in a mail box.

Press [Scan and Store] → [Mail Box].

Select the desired Mail Box → press [Scan].

Press [Options] → [N on 1].

Select the type of N on 1.

If you place a two-sided original, press [2-Sided Original] → select the type of two-sided original → press [OK].

Type of Two-Sided Original

[Book Type]:	The front and back sides of the original have the same top-bottom orientation.
[Calendar Type]:	The front and back sides of the original have opposite top-bottom orientations.

To select the order of the layout, press [Set Details]. Select the order of the layout → press [OK].

If you do not change the settings by pressing [Set Details], the order of the layout is as follows:

2 on 1:	Left → Right
All other options except 2 on 1:	Upper Left → Upper Right → Lower Left → Lower Right

To specify the original size, press [Change] for <Original Size> → select the size → press [OK].

To change the data output size, press [Change] for <Data Output Size> → select the paper size → press [OK].

NOTE
The machine automatically selects the zoom ratio depending on the selected paper size. If you set [N on 1], the Center Shift mode is also automatically set.

Press [OK] → [Close].

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Combination of Functions Chart." You can change or specify the settings for the number of copies or the 2-Sided Original mode before scanning the next batch of originals (i.e., between batches). Originals must all be the same size.