Front Side

Control panel

The control panel consists the numeric keys, , indicators, touch panel display, etc. You can perform all the operations and specify settings from the control panel. Control Panel

Feeder

Automatically feeds originals into the machine for scanning. When two or more sheets are loaded in the feeder, originals can be scanned continuously. Feeder

USB port (Front-right side of the machine)

You can connect devices such as a USB memory device to the machine. Connecting a USB Memory Device
Memory media that does not meet the USB specification is not supported. Some types of memory media may not be able to save data correctly.
The USB port (front-right side of the machine) supports USB 2.0.

Right cover of the main unit

Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source

Multi-purpose tray

Load paper into the multi-purpose tray when you want to use a type of paper different from that which is loaded in the paper drawer.
Multi-Purpose Tray
Loading Paper in the Multi-Purpose Tray

Power switch

Press the power switch when turning ON or OFF the machine.
Turning ON the Machine
Turning OFF the Machine

Front cover of the main unit

Open this cover when replacing the toner cartridge, the waste toner container, the drum unit, or cleaning the dust-proof glass.
Replacing the Toner Cartridge
Replacing the Waste Toner Container
Replacing the Drum Unit
Cleaning the Dust-Proof Glass

Right cover of the paper drawer

Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source

Paper drawer 1

You can load LGL, LTR, STMT, and EXEC size paper, which are frequently used sizes. Paper Drawer

Telephone line jack (LINE 1)

Connect a telephone cable when connecting the machine to a telephone line.

Additional telephone line jack (LINE 2)

Use this port to connect the Super G3 2nd Line Fax Board to the machine. System Options 

Glass cleaning sheet storage box

Use this box to store sheets for cleaning the platen glass.

Motion sensor

When the motion sensor detects a person near the machine, the machine exits sleep mode automatically. Entering Sleep Mode

Output tray

Paper is output here when printing finishes.

Toner Code

This code indicates the type of genuine toner that can be used with the machine. Use toner with a code that includes the same letters as the code on the front cover of the machine. 
For more information about the configuration of optional equipment installed on the machine, see Options.
Connecting a USB Memory Device
You can connect a USB memory device to the USB ports located on the right side of the machine, and directly print data from the USB memory device. Originals scanned using the machine can also be saved directly to the USB memory device. Working with Data in Memory Media
Disconnecting the USB memory device
Make sure to follow the proper procedure when removing the memory media. Failure to do so may cause the memory media or machine to malfunction.
The machine supports FAT32/exFAT format memory media.
Make sure that the memory media is oriented properly when connecting it to the machine. If it is not connected properly, it may cause the memory media or machine to malfunction.
Be sure to check before using memory media
To use the memory media, it is necessary that <Memory Media> in <Store Location Display Settings> is set to <On>.
Set <Use Scan Function> and <Use Print Function> to <On>. <Use Scan/Print Function>
When the memory media is not recognized even if it is connected properly, the machine may be set to use the MEAP driver for USB external storage device. Set <Use MEAP Driver for USB Storage Device> to <Off>. <Use MEAP Driver for USB Storage Device>
Unsupported devices and usages
Memory media with security functions
Memory media that does not meet the USB specification
Memory card readers connected via USB
Connecting memory media via an extension cable
Connecting memory media via a USB hub
1A94-01F