Scan and Send > Specifying Destinations > Destinations Not Stored in the Address Book > Advanced Box
*
Advanced Box

Return to Overview

You can store scanned documents in an Advanced Box opened externally as an SMB server or WebDAV server. The stored files can be access from a computer for viewing or editing.

Remark
  • To send to an Advanced Box, it must be opened externally as an SMB server or WebDAV server in advance. You can also manage authentication for the users of the Advanced Box. For information on the settings for using an Advanced Box, see "Advanced Box/Network Settings" in "Scan and Store" and "Access Stored Files."

  1. Press [New Destination].
  1. Press [File].
  1. Press the Protocol drop-down list → select the desired sending protocol.

Select [Windows (SMB)] or [WebDAV].

  • To save files in the Advanced Box of an imageRUNNER ADVANCE machine with an imagePASS attached, select [WebDAV]. (Windows (SMB) cannot be used.)
  • If you select [Windows (SMB)] as the server protocol, you can specify an Advanced Box on the network by pressing [Browse]. For instructions on using the Browse key, see "Using the Browse Key (Windows (SMB))."
  • If you select [Windows (SMB)] as the server protocol, you can specify an Advanced Box on the network by pressing [Search Host]. For instructions on using the Search Host key, see "Using the Search Host Key (Windows (SMB))."
  • If you select [Windows (SMB)]:
  • If you select [WebDAV]:

  • If you select [Windows (SMB)]:
  • Specify [Host Name].

Press [Host Name] → enter the IP address or host name of the destination imageRUNNER ADVANCE machine plus "\share" or "\users" → press [OK].
Example:
To save to the Shared Space: \\192.168.100.50\share
To save to the Personal Space: \\192.168.100.50\users

  • To send to the Advanced Box of a machine from the same machine, it is recommended that you specify a loopback address (an address that indicates the same device on a network). Specify the loopback address as indicated below.
  • Using an IP address (IPv4 format): 127.0.0.1
  • Using an IP address (IPv6 format): [::1]
  • Using a host name: localhos
  • If you specify a loopback address, you can use the following functions
  • You can use the URI sending function to notify a user via e-mail that a file has been saved. (See "Specifying the URI TX Settings" in "Remote UI.")
  • You can save to the Advanced Box even if [Prohibit Writing from External] is set to 'On'. (See "Prohibiting Writing from External Users" in "Security.")
  • For information on whether you can specify the destination imageRUNNER ADVANCE machine using a host name, consult your system administrator.
  • Press [Folder Path].

Press [Folder Path] → enter a folder path → press [OK]. A folder path is a series of characters that signify the location of the folder. Here, specify which folder under the Shared Space (share) or Personal Space (users) to save the document to.
Example:
\folder
(To send to the [folder] folder in the Shared Space)

  • You cannot store data directly in the Shared Space (share) or Personal Space (users) of the destination.
  • Press [User Name] and [Password].

If authentication management is used for the destination Advanced Box, enter a user name and password registered in the destination.

  • If you select [WebDAV]:
  • Specify [Host Name].

Press [Host Name] → enter the IP address or host name of the destination imageRUNNER ADVANCE machine → press [OK].
Example:
http://192.168.1.21

  • Specify [Host Name] as indicated below.
  • If SSL is invalid: http://<IP address or host name>
  • If SSL is valid: https://<IP address or host name>
  • To send to the Advanced Box of a machine from the same machine, it is recommended that you specify a loopback address (an address that indicates the same device on a network). Specify the loopback address as indicated below.
  • Using an IP address (IPv4 format): 127.0.0.1
  • Using an IP address (IPv6 format): [::1]
  • Using a host name: localhost
  • If you specify a loopback address, you can use the following functions:
  • You can use the URI sending function to notify a user via e-mail that a file has been saved. (See "Specifying the URI TX Settings" in "Remote UI.")
  • You can save to the Advanced Box even if [Prohibit Writing from External] is set to 'On'. (See "Prohibiting Writing from External Users" in "Security.")
  • If the destination imageRUNNER ADVANCE machine has an imagePASS attached, specify [Host name] as indicated below.
  • To send to the Advanced Box of another machine with an imagePASS attached:
    If SSL is invalid: http://<IP address or host name>:18080
    If SSL is valid: https://<IP address or host name>:18443
  • To send to the Advanced Box of this machine if it has an imagePASS attached (using a loopback address):
    Using the IPv4 format:
    If SSL is invalid: http://127.0.0.1:18080
    If SSL is valid: https://127.0.0.1:18443

    Using the IPv6 format:
    If SSL is invalid: http://[::1]:18080
    If SSL is valid: https://[::1]:18443

    Using a host name:
    If SSL is invalid: http://localhost:18080
    If SSL is valid: https://localhost:18443

  • When sending to the Advanced Box of this machine from the same machine if it has an imagePASS attached, you may not be able send using a loopback address if [Use Proxy] is set to 'On'. In this case, enter the IP address of the imagePASS. (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
  • For information on whether you can specify the destination imageRUNNER ADVANCE machine using a host name, consult your system administrator.
  • Press [Folder Path].

Press [Folder Path] → enter a folder path → press [OK]. A folder path is a series of characters that signify the location of the folder. Here, specify which folder under the Shared Space (share) or Personal Space (users) to save the document to.
Example:
/share/folder
(To send to the [folder] folder in the Shared Space)

  • You cannot store data directly in the Shared Space (share) or Personal Space (users) of the destination.
  • Press [User Name] and [Password].

If authentication management is used for the destination Advanced Box, enter a user name and password registered in the destination.
  1. To add destination, press [Next Destination] and repeat the procedure of step 3.
  1. Press [OK].

  • Back To Top