e-Manual TopContentsHelpGlossary
Category
Top » Maintenance » Routine Cleaning » Platen Glass and Underside of the Feeder/Platen Cover

Category Top

Loading Paper

Loading Paper into a Paper Drawer

Adjusting a Paper Drawer to Hold a Different Paper Size

Loading Transparencies

Loading Paper into the Paper Deck Unit-B2 (Optional)

Loading Envelopes Using the Envelope Feeder Attachment-D1 (Optional)

Replacing the Stamp Cartridge (Feeder)

Replacing the Staple Cartridge (For Optional Products)

Replacing the Staple Cartridge in the Stapler Unit (Staple Finisher-G1/Booklet Finisher-G1)

Replacing the Staple Case in the Saddle Stitcher Unit (Booklet Finisher-G1)

Replacing the Staple Cartridge (Inner Finisher-D1)

Removing Punch Waste (For Optional Products)

External 2/3 Hole Puncher-B2

Inner 2/3 Hole Puncher-A1

Replacing the Toner Cartridge

Replacing the Waste Toner Container

Routine Cleaning

Platen Glass and Underside of the Feeder/Platen Cover

Manual Feeder Cleaning

Automatic Feeder Cleaning

Consumables

Collapse all|Expand all
Platen Glass and Underside of the Feeder/Platen Cover
If the platen glass or the underside of the feeder/platen cover is dirty, the original may not be scanned clearly, or the size of the original may be detected incorrectly.

1.
Clean the platen glass and the underside of the feeder/platen cover with a cloth dampened with water, and then wipe them clean with a soft, dry cloth.
1. Clean the platen glass.
2. Clean the underside of the feeder/platen cover.