Paper Jams in the Staple Finisher-V1/Booklet Finisher-V1
Check the location of the paper jam on the touch panel display, and remove it. The Staple Finisher-V1/Booklet Finisher-V1 are optional. Optional Equipment
Inside the Front Cover
Follow the procedure described in this section to clear the paper jam.
1
Open the front cover of the finisher.
2
Turn the delivery knob and feed the jammed paper to the main tray.
3
Remove the jammed paper from the paper output area of the main tray.
 |
 |
Open the output guide and use your finger to keep it open.
|
 |
Remove the jammed paper.
|
|
 |
Close the output guide.
|
4
Open the escape guide.
  |
|
Open the lower escape guide.
|
|
|
Open the upper escape guide.
|
5
Remove the jammed paper.
 |
|
Remove the jammed paper.
|
|
|
Close the upper escape guide.
|
6
Lift the first flap.
7
Remove the jammed paper.
 |
|
Remove the jammed paper.
|
|
|
Lower the first flap.
|
|
|
|
Close the lower escape guide.
|
8
Remove the jammed paper from the puncher unit or entrance guide.
When the 2/3 Hole Puncher Unit-A1 or 2/4 Hole Puncher Unit-A1 is attached.
 |
|
Lift the puncher unit.
|
|
|
Remove the jammed paper.
|
|
|
|
Lower the puncher unit.
|
When the 2/3 Hole Puncher Unit-A1 or 2/4 Hole Puncher Unit-A1 is not attached.
 |
|
Open the entrance guide.
|
|
|
Remove the jammed paper.
|
|
|
|
Close the entrance guide.
|
9
Close the front cover of the finisher.
10
Follow the instructions on the touch panel display.
Resume the procedure that was interrupted.
Saddle Stitcher Unit of the Booklet Finisher-V1
Follow the procedure described in this section to clear the paper jam.
1
Open the front cover of the finisher.
2
Pull out the saddle stitcher unit.
 |
|
Turn the knob at the top of the saddle stitcher unit about 10 times.
|
|
|
Pull out the saddle stitcher unit.
|
3
Remove the jammed paper.
 |
|
Open the transparent guide.
|
|
|
Remove the jammed paper.
|
|
|
|
Close the transparent guide.
|
4
Gently push the saddle stitcher unit back into its original position.
5
Close the front cover of the finisher.
6
Follow the instructions on the touch panel display.
Resume the procedure that was interrupted.