e-ManualTopSite mapHelpGlossary

Category Top

Optional Equipment and System Requirements

Printing or Sending a Fax from a Computer

Using E-Mail/I-Fax

Sending Data

Checking Your Network Environment

Network Environment Setup Procedures

Connecting the Machine to a Computer or Network

Specifying Network Settings from the Touch Panel Display

Interface Settings

Communication Environment Setup

IEEE802.1X Authentication Settings

Selecting the IEEE802.1X Authentication Method

TCP/IP Network Setup Procedures

Protocol Settings

TCP/IPv4 Settings

TCP/IPv6 Settings

Settings Common to TCP/IPv4 and TCP/IPv6

Confirming TCP/IPv4 Settings (PING Command)

Confirming TCP/IPv6 Settings (PING Command)

Setting the Key Pair Used With SSL Encrypted Communications

IPSec Settings

Registering a Security Policy
Editing a Security Policy

Startup Time Settings

Setting Up a Computer for Printing/Sending a Fax

Printer Connection Method (LPD/Raw)

Windows 2000/XP/Server 2003/Server 2008/Vista/7/Server 2008 R2
Mac OS X 10.3.9 or Later
UNIX

Printer Connection Method (IPP/IPPS)

Printer Connection Method (FTP)

Printer Connection Method (WSD)

Setting Up a Computer as a File Server

FTP Server Settings

WebDAV Server Settings

NetWare Network Setup Procedures

NetWare Print Service Settings

Setup Using NetWare Administrator or PCONSOLE

Protocol Settings

Setting Up a Computer for Printing/Sending a Fax

SMB/CIFS Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing/Sending a Fax

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network

Printer Connection Method

Setting Up a Computer as a File Server

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network and Configuring a Shared Folder

AppleTalk Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing

Network Connection Problems and Remedies

Printing Problems and Remedies

Data Sending/File Sharing Problems and Remedies

Encrypted SSL Data Communication Problems and Remedies

Confirming Settings

Checking the Block Log

Obtaining the Public Key of the Machine to Use SSL with Windows Server 2008/Vista/7/Server 2008 R2

Top » Network » NetWare Network Setup Procedures
NetWare Network Setup Procedures
08JK-20U
To use a NetWare network, it is necessary to perform the following procedures.
1 NetWare Print Service Settings
Specify the NetWare print service settings. (Optional equipment is required to print or send a fax from a computer. For information on the optional products required, see "Optional Equipment and System Requirements.") To specify the settings from the computer, use one of the following:
NWADMIN or PCONSOLE (Novell software provided with NetWare)
Canon utilities
2 Protocol Settings
Specify the protocol settings. To specify the settings, use one of the following:
The machine's control panel
The Remote UI (via a Web browser)
Canon utilities
3 Setting Up a Computer for Printing/Sending a Fax
Specify the settings of each computer you use for printing or sending a fax. (Optional equipment may be required for printing from computers and sending faxes, depending on the model of your machine. For information on the optional products required, see "Optional Equipment and System Requirements.")
IMPORTANT
It is recommended that you consult the administrator for the network you are using when performing the settings in steps 1 and 2.
To configure settings with software other than the control panel of the machine, NWADMIN, or PCONSOLE, TCP/IPv4 protocol must be supported by your network environment (IPv6 is not supported).
If you are using the imagePASS or the ColorPASS, see the manual provided with the imagePASS or the ColorPASS.
If you are using the imagePASS or the ColorPASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS or the ColorPASS.
Back to Top