e-ManualTopSite mapHelpGlossary

Category Top

Optional Equipment and System Requirements

Printing or Sending a Fax from a Computer

Using E-Mail/I-Fax

Sending Data

Checking Your Network Environment

Network Environment Setup Procedures

Connecting the Machine to a Computer or Network

Specifying Network Settings from the Touch Panel Display

Interface Settings

Communication Environment Setup

IEEE802.1X Authentication Settings

Selecting the IEEE802.1X Authentication Method

TCP/IP Network Setup Procedures

Protocol Settings

TCP/IPv4 Settings

TCP/IPv6 Settings

Settings Common to TCP/IPv4 and TCP/IPv6

Confirming TCP/IPv4 Settings (PING Command)

Confirming TCP/IPv6 Settings (PING Command)

Setting the Key Pair Used With SSL Encrypted Communications

IPSec Settings

Registering a Security Policy
Editing a Security Policy

Startup Time Settings

Setting Up a Computer for Printing/Sending a Fax

Printer Connection Method (LPD/Raw)

Windows 2000/XP/Server 2003/Server 2008/Vista/7/Server 2008 R2
Mac OS X 10.3.9 or Later
UNIX

Printer Connection Method (IPP/IPPS)

Printer Connection Method (FTP)

Printer Connection Method (WSD)

Setting Up a Computer as a File Server

FTP Server Settings

WebDAV Server Settings

NetWare Network Setup Procedures

NetWare Print Service Settings

Setup Using NetWare Administrator or PCONSOLE

Protocol Settings

Setting Up a Computer for Printing/Sending a Fax

SMB/CIFS Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing/Sending a Fax

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network

Printer Connection Method

Setting Up a Computer as a File Server

Connecting to a TCP/IP Network

Connecting to an SMB/CIFS Network and Configuring a Shared Folder

AppleTalk Network Setup Procedures

Protocol Settings

Setting Up a Computer for Printing

Network Connection Problems and Remedies

Printing Problems and Remedies

Data Sending/File Sharing Problems and Remedies

Encrypted SSL Data Communication Problems and Remedies

Confirming Settings

Checking the Block Log

Obtaining the Public Key of the Machine to Use SSL with Windows Server 2008/Vista/7/Server 2008 R2

Top » Network » Obtaining the Public Key of the Machine to Use SSL with Windows Server 2008/Vista/7/Server 2008 R2
Obtaining the Public Key of the Machine to Use SSL with Windows Server 2008/Vista/7/Server 2008 R2
08JK-21S
If you want to use IPPS printing, it is necessary to obtain the public key of the machine and install it in Windows Server 2008/Vista/7/Server 2008 R2 by following the procedure below.
1.
Start the Remote UI of the machine → click [Continue to this website (not recommended)].
2.
Double-click [Internet | Protected Mode:On], located on the bottom-right of the Web browser.
3.
Select [Trusted sites] → click [Sites].
https://<the IP address or host name of the machine> appears.
4.
Click [Add] → [Close].
5.
If [Enable Protected Mode (requires restarting Internet Explorer)] is selected, deselect it → click [OK].
The display returns to the Remote UI screen.
6.
Close the Web browser → start the Web browser → perform step 1 again.
7.
Click [Certificate Error] on the right of the address bar → select [View certificates].
8.
Confirm [Install Certificate] in the dialog box that appears.
9.
In the certificate import wizard, click [Next] → select [Place all certificates in the following store] → click [Browse].
10.
Select [Trusted Root Certification Authorities] → follow the instructions on the screen to close the wizard.
11.
If you deselected [Enable Protected Mode (requires restarting Internet Explorer)] in step 5, select it again.
Back to Top