This section describes useful send functions that enable you to perform various kinds of editing such as sending different sized originals together or two-sided originals to fit your needs.

If <Enable Fax in Scan and Send Function> is set to 'On' in [Display Fax Function], you can also set the sender name for fax destination and the direct sending mode. (See "Display Fax Function.")

For information on setting the sender name and the direct sending mode, see "Using the Machine to Send/Receive a Fax."

• Depending on the mode, some combinations of modes will not be available. See the corresponding section on each mode for detailed information.

• To cancel all settings, press (Reset).

1. Place your originals and specify the destination.

• Depending on the mode, you may have to place your original on the platen glass or in the feeder. See the corresponding section on each mode for detailed information.

2. Press [Options].

3. Select the desired mode from the Options screen → set the mode.

1/2

2/2

For more information on setting each mode, see the corresponding section.

To set other modes at the same time, repeat steps 2 and 3.

4. Press [Close].

• Back To Top