Scan and Send > Useful Send Function (Options) > Finished Stamp
*
Finished Stamp

Return to Overview

The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front side of scanned and sent originals.



Vertical Placement



Horizontal Placement

Remark
  • The Stamp mode cannot be used with the Scan Size (Custom), or Book 2 Page mode.
  • Place your originals in the feeder. The finished stamp is applied to the originals that are scanned from the feeder.
  • To cancel this setting, press [Options] → [Finished Stamp].

  1. Place your originals into the feeder and specify the destination → press [Options].
  1. Press [Finished Stamp].

  • If the stamp is not marked clearly, see "Maintenance."

  • Back To Top