Return to Overview

You can set the original type to easily specify the optimal settings for scanning and sending.

• Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one of these modes, the previously set mode is canceled.

• If you scan an original containing halftones, such as a printed image, using the Photo mode, the moiré effect (a shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using the Sharpness mode. (See "Sharpness.")

• If the original is a transparency, select the original type → adjust the exposure to the most appropriate level for the original.

• Text/Photo Mode

This mode is best suited for scanning originals containing both text and photos, such as magazines or catalogues.

• Photo Mode

This mode is best suited for scanning photos printed on photographic paper, or photo originals containing halftones (e.g., printed photos).

• Text Mode

This mode is best suited for scanning text originals. Blueprints or pencil drawn originals can also be scanned clearly.

1. Place your originals and specify the destination → press [Options].

2. Press [Original Type].

3. Select the original type ([Text], [Photo], or [Text/Photo]).

• If you want to adjust the text/photo processing priority level:

• If you are not performing the above operation, proceed to the next step.

• If you want to adjust the text/photo processing priority level:

• Press [Adjust Level].

• Press [Text Priority] or [Photo Priority] to adjust the degree of priority for text or photo images → press [OK].

<Adjust Level>:

You can adjust the text/photo priority level. If you want to reproduce the text as faithfully as possible, press [Text Priority], and move the indicator to the left. If you want to reproduce the picture as faithfully as possible, press [Photo Priority] and move the indicator to the right.

• To cancel this setting, press [Cancel Settings].

4. Press [OK].

• Back To Top