*
 
Additional Network Settings

Depending your network environment, additional network settings may be required.

Remark
  • It is recommended that the network administrator perform the following procedures.
  • To set the machine to a network with the LASER CLASS 810, an optional network printer kit is required.

TCP/IP Settings (IPv4)

DNS Settings (IPv4 Settings)

IP Address Range Settings (IPv4 Settings)

WINS Settings (LASER CLASS 830i Only)

PASV mode for FTP Setting (LASER CLASS 830i Only)

FTP Extension Settings (LASER CLASS 830i Only)

HTTP Settings

Port Number Settings

RX MAC Address Settings

Proxy Settings (LASER CLASS 830i Only)

TCP/IP Settings (IPv6)

Remark
  • You cannot use the functions of IPv6 without using the functions of IPv4.

DNS Settings (IPv6 Settings)

IP Address Range Settings (IPv6 Settings)

HTTP Settings (IPv6 Settings)

 

You can restrict the use of Remote UI.

Remark
  • For the setting procedure, see "HTTP Settings."

Port Number Settings (IPv6 Settings)

 

Depending on your network environment, you can change the port number for each protocol.

Remark
  • For the setting procedure, see "Port Number Settings."

 
  • Back To Top