|
|
|
|
|
- Press [] or [] to select <ON> or <OFF>, then press [OK].
<Off>: |
Does not use the DNS server dynamic update function. |
<On>: |
Use the DNS server dynamic update function. |
- The DNS dynamic update function enables the machine to register its IP address, host name, and domain name to the DNS server automatically. This function is available in the environment where there is a dynamic DNS server.
- To use the DNS dynamic update function, enter the IP address of a DNS server, and the host name and domain name of the machine.
- If you have a DHCP server running Windows 2000 Server that uses the DHCP service and want to register the machine's DNS record, configure the following settings in the DHCP server:
- Under the DHCP server, right-click the [Scope] icon → click [Properties]. In the [DNS] sheet of the displayed dialog box, select [Automatically update DHCP client information in DNS] → [Update DNS only if DHCP client requests].
- If you have a DHCP server running Windows 2003 Server that uses the DHCP service and want to register the machine's DNS record, configure the following settings in the DHCP server:
- Under the DHCP server, right-click the [Scope] icon → click [Properties]. In the [DNS] sheet of the displayed dialog box, select [Enable DNS dynamic updates according to the settings below] → [Dynamically update DNS A and PTR records only if requested by the DHCP clients].
|