Adjust the sound volume during a fax transmission.

Adjust the ring volume when receiving a fax.

Adjust the fax sound volume when sending is complete.

Adjust the fax sound volume when receiving is complete.

Adjust the fax sound volume when scanning is complete.

Specify whether or not the machine makes a sound when a key on the operation panel is pressed.

Specify whether or not the machine makes a sound when an invalid key is pressed.

Specifies whether or not the machine makes a sound when a toner cartridge is almost empty.

Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations.

Specifies whether the machine makes a sound when a job other than faxing is completed.
Specify the job done tone in <TX Done Tone> and <RX Done Tone>.

Specifies whether the machine makes a sound it is in Energy Saver mode.

Select the default screen displayed when the machine is turned ON or after auto reset is performed.

Select the display language for the machine.

Select the display language for the Remote UI:

Adjusts the brightness of the display.

Adjust the display contrast:

When <On> is selected, the colors of the display are inverted.

Select <On> in case you have difficulty viewing the display.

Set the unit of measurement for the paper size.

Set a unit of measure for paper weight.

Set the duration during which each message is displayed on the screen.

Adjust the speed to scroll the menu when all the menu items cannot be shown on the screen.

When entering characters, specifies whether to move the cursor to automatically to the next field.