<Fax Tone>

Adjust the sound volume during a fax transmission.

Select <On> (sound enabled) or <Off> (sound disabled) using [] or [] and press [OK].
Proceed to Step 5.

<Ring Tone>

Adjusts the ring volume when receiving a fax.

Press [] or [] to select <On> to activate the ring or <Off> to deactivating the sound, and then press [OK].
Proceed to Step 5.

<TX Done Tone>

Adjust the fax sound volume when sending is complete.

Select <On> (sound enabled) or <Off> (sound disabled) using [] or [] and press [OK].
When <Only When Error Occurs> is selected, the machine makes a sound only when an error occurs.
Proceed to Step 5.

<RX Done Tone>

Adjust the fax-sounds volume when receiving is complete.

<Scanning Done Tone>

Adjust the fax-sounds volume when scanning is complete.

<Entry Tone>

Specify whether or not the machine makes a sound when a key on the operation panel is pressed.

Select <On> (sound enabled) or <Off> (sound disabled) using [] or [] and press [OK].
Proceed to Step 5.

<Invalid Entry Tone>

Specify whether or not the machine makes a sound when an invalid key is pressed.

<Restock Supplies Tone>

Specify whether or not the machine makes a sound when a toner cartridge is almost empty.

<Warning Tone>

Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations.

<Job Done Tone>

Specify whether or not the machine makes a sound when a job is complete.

<Energy Saver Alert>

Specify whether or not the machine makes a sound when the machine enters the sleep mode.