e-Manual TopContentsHelpGlossary
Category
Top » Setting and Managing from Computer » Using the Remote UI » Starting the Remote UI

Category Top

Using the Remote UI

Operating Environment

Starting the Remote UI

Screen Layout of the Remote UI

Checking the Status and Information of the Machine

Checking the Current Status of the Machine

Checking the Current Status of Print Jobs

Displaying the Job History

Displaying the Error Information

Checking the Functions Available to Use

Checking the System Manager and Installation Location

Checking the Counter

Import/Export the Settings

Saving the Address Book as a File (Export)

Loading the Address Book from the Saved File (Import)

Saving the Menu as a File (Export)

Loading the Menu from the Saved File (Import)

Attention (Import/Export)

Configuring the Settings from the Remote UI

Collapse all|Expand all
Starting the Remote UI
07K4-0LW
IMPORTANT
Before using the Remote UI
Check the IP address of the machine.
"Checking IP Address Settings"
Ask your network administrator when you are not sure of the IP address of the machine.
1
Configure a network connection.
"Selecting the method for connecting to the machine"
2
Start the Web browser.
3
Enter "http://IP address of the machine/" in the address field and press the [ENTER] key on the keyboard.
Input Example: http://192.168.0.215/
4
Log on to the Remote UI.
When the department ID management is not set
(1)
Select [Management Mode] or [End-User Mode].
(2)
[Management Mode]:
Enter [System Manager ID] and [System Manager PIN].
[End-User Mode]:
Enter [User Name].
(3)
Click [Log In].
[Management Mode]
You can perform all the operations and settings of the Remote UI.
[End-User Mode]
Allow checking the device status, confirming settings, and viewing jobs. You can also handle the jobs queued by your user name that you enter upon logon.
When the department ID management is set
(1)
Enter [Department ID] and [PIN].
(2)
Click [Log In].