e-ManualTopSite mapHelp

Category Top

Loading Paper

Loading Paper into a Paper Deck (Main Unit, POD Deck-D1 (Optional))

Adjusting a Paper Deck to Hold a Different Paper Size (Main Unit, POD Deck-D1 (Optional))

Loading Pre-Punched Paper

Loading Transparency/Clear/Translucent Film

Loading Tab Paper

Loading Paper into the POD Deck Lite-C1 (Optional)

Loading Paper into the LONG SHEET TRAY-A1 (Optional)

Loading Paper into the Document Insertion Unit-N1 (Optional)

Replacing the Staple Cartridge (For Optional Products)

Replacing the Staple Cartridge in the Stapler Unit (Finisher-AN1/Saddle Finisher-AN2)

Replacing the Staple Cartridge in the Saddle Stitcher Unit (Saddle Finisher-AN2)

Removing Staple Waste (Finisher-AN1/Saddle Finisher-AN2)

Removing Punch Waste (Puncher Unit-BS1/Puncher Unit-BT1)

Operating the Limited Functions Mode

Replacing Cleaning Web Unit

Replacing the Toner Cartridge

Replacing the Waste Toner Container

Routine Cleaning

Originals Cannot Be Scanned Properly (Cleaning the Platen Glass)

Originals Cannot Be Scanned Properly (Cleaning Method of the Original Scanning Area)

Scanned Originals Become Dirty (Manual Feeder Cleaning)

Scanned Originals Become Dirty (Automatic Feeder Cleaning)

Output Paper Becomes Dirty (Cleaning Inside of the Main Unit)

Output Paper Becomes Dirty (Wire Cleaning)

Output Paper Becomes Dirty (Roller Cleaning)

Streaks and Gloss Unevenness Appear on Output Paper (Refreshing the Fixing Roller)

Streaks and Gloss Unevenness Appear on Output Paper (Adjusting the Fixing Roller Auto Refresh Level)

Cleaning the Touch Panel Display

Consumables

Top ยป Maintenance
Maintenance
0S9Y-07U
Not sure how to load paper or replace the toner?
This category describes the procedures for loading and replacing consumables, and methods for cleaning the machine.
High quality copying, scanning, and printing can be maintained through these simple day-to-day tasks.
Loading Paper
Loading Paper into a Paper Deck (Main Unit, POD Deck-D1 (Optional))
Loading Paper into the POD Deck Lite-C1 (Optional)
Loading Paper into the LONG SHEET TRAY-A1 (Optional)
Replacing Consumables
Replacing the Staple Cartridge (For Optional Products)
Replacing Cleaning Web Unit
Replacing the Toner Cartridge
Replacing the Waste Toner Container
Consumables
Routine Maintenance
Removing Staple Waste (Finisher-AN1/Saddle Finisher-AN2)
Removing Punch Waste (Puncher Unit-BS1/Puncher Unit-BT1)
Routine Cleaning
Back to Top