Sending Data to a File Server

The following operations and settings are required to send data to a file server with the machine.

NOTE
For information on the system requirements for using this function, see "Sending Data." The file servers you can use differ depending on the network you are using. For information on the file servers you can use, refer to the following, according to the network you are using. Setting Up a Computer as a File Server for a TCP/IP network Setting Up a Computer as a File Server for an SMB/CIFS network

NOTE

For information on the system requirements for using this function, see "Sending Data."

The file servers you can use differ depending on the network you are using. For information on the file servers you can use, refer to the following, according to the network you are using.

Setting Up a Computer as a File Server for a TCP/IP network

Setting Up a Computer as a File Server for an SMB/CIFS network

1. Connect the machine to the network.

Connecting to a Network

Interface Settings

2. Set the machine for the type of network you are using.

For a TCP/IP network:

Protocol Settings

For an SMB/CIFS network

Protocol Settings

3. Set up the file server.

For an FTP server

FTP Server Settings

For a WebDAV server

WebDAV Server Settings

For a Windows shared folder/Samba shared folder

Setting Up a Computer as a File Server

To Practical Workflows

Scanning the Original and Sending to a Computer