How to Set an ICC Profile

- Setting with Adobe Photoshop CS5 -

Follow these steps to set an ICC profile when printing via Adobe Photoshop CS5.

Select the image for which you want to set a profile from Photoshop and click File, then select Print....

The Print dialog box appears.

From Color Handling, select Photoshop Manages Colors.

From Printer Profile, select the installed ICC profile.

Set a method for Rendering Intent.

Uncheck Black Point Compensation.

Next, set up the printer driver.

Make sure that your printer is selected, then click Print Settings....

The (Your printer name) Properties dialog box appears.

Click the Main tab, then set Media Type, Paper Source and Print Quality.

From Paper Name & Corresponding ICC Profile, select the Media Type and Paper Source that matches the paper you want to use for printing.

Click Manual for Color/Intensity.

Click Set... to the right of Manual.

The Manual Color Adjustment dialog box appears.

Click the Matching tab, then select None for Color Correction.

Click the Color Adjustment tab, adjust color balance, Brightness, Intensity and Contrast as needed, then click OK.

Click OK and close the Manual Color Adjustment dialog box.

Click the Page Setup tab in (Your printer name) Properties dialog box, select Page Size.

	Reference When Other Glossy Paper (Margin 35), Other Fine Art Paper 1, or Other Fine Art Paper 2 is selected for Media type in Main tab, select Art XX (Margin 35) for Page Size. XX stands for the paper size.

Click OK and close the (Your printer name) Properties dialog box.

Click Print in the Print dialog box and start printing.

	Reference For details on printing procedures and other settings, refer to the user's guide of the printer.

Top of Page
Previous	Next