Return to Overview

• The Erase Original Frame mode cannot be used with the Scan Size (11"x17"+, Auto, Custom, Long Original, and Free Size) or Different Size Originals mode.

• To cancel this setting, press [Options] → [Erase Frame] → [Erase Original Frame] → [Cancel Settings].

1. Place your originals and specify the destination → press [Options].

2. Press [Erase Frame].

3. Press [Erase Original Frame].

4. Press [-] or [+] to set the frame erase width.

• If you want to set the same width for all four borders:

• If you want to set the top, left, right, and bottom widths independently:

• If you want to set the same width for all four borders:

• Press [-] or [+] to set the frame erase width.

• If you want to set the top, left, right, and bottom widths independently:

• Press [Adjust Independently].

• Select the desired frame erase borders → press [-] or [+] to set their respective frame erase widths.

To return to the screen for setting the same width for all four borders, press [Uniform Width].

5. Press [Change] → select the original size → press [OK].

• You can set the Erase Original Frame mode only for the original paper sizes shown on the touch panel display.

• To select an A or B series paper size, press [A/B Size].

6. Press [OK].

• Back To Top