Return to Overview

To "Settings/Registration Table"

You can set to manually deliver device information.

• When delivering device information, the following machines will not update their information:

• Machines which are processing a send job

• Machines importing or exporting data via the Remote UI

• The client machine which is receiving device information from another host machine will not update the address book.

• The client machine which is performing a print job will not update the printer settings.

1. Press (Settings/Registration) → [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Manual Delivery] under <Transmitting Settings>.

2. Select which device information you want to deliver → press [Next].

Details of each item are shown below.

<Network Settings>:

Available when [On] is selected for <Settings/Registration Value>. Select [Include] to deliver the network settings, or [Exclude] to not deliver the network settings → press [OK].

3. Select the destinations → press [Start Manual Delivery].

If you want to cancel the delivery, press [Cancel].

• Even if you press [Cancel] on the delivery in progress screen, delivery will not be canceled for
  machines to which information has already been delivered. Delivery to the next selected
  machine will be canceled.

4. When delivery is complete, confirm the delivery results displayed in the <Status> column on the Manual Delivery screen.

• Back To Top