Return to Overview

To "Settings/Registration Table"

1. Press (Settings/Registration) → [Management Settings] → [Device Management] → [Device Information Delivery Settings] → [Register Destinations] under <Transmitting Settings>.

2. Register a destination.

• To manually register a destination:

• To automatically search for destinations:

• To manually register a destination:

• Press [Reg.].

• Enter the IP address of the destination or FQDN (Fully Qualified Domain Name) (i.e., starfish.organization.company.com) → press [OK].

• For instructions on entering characters, see "Basic Operations."

• If any of the following is true for the destination machine, a message <Could not retrieve information for the device to register. Register as a destination?> is displayed. If you press [Yes], <Deliverable Settings> on the Details screen will be blank.

• The main power is turned OFF

• The destination machine is not connected to the network

• A default key is not set

• Every function in Restrict Receiving for Each Function under <Receiving Settings> in Device Information Delivery Settings is set to 'On'

• [Use HTTP] is set to 'Off' in [Preferences] (Settings/Registration)

• To automatically search for destinations:

• Press [Auto Search/Register].

• Press [Start Auto Search].

To display the search results as host names, press [Display Host Name].

Press [-] or [+] to set the search depth (how many routers to search).

• Since searching uses SLP (Service Location Protocol), machines behind a router will not be detected if the router is set to restrict passing with the SLP protocol.

• If any of the following is true for the destination machine, you cannot search the destination.

• The main power is turned OFF

• The destination machine is not connected to the network

• A default key is not set

• Every function in Restrict Receiving for Each Function under <Receiving Settings> in Device Information Delivery Settings is set to 'On'

• [Use HTTP] is set to 'Off' in [Preferences] (Settings/Registration)

• Select the destination → press [OK].

To select all of the destinations, press [Select All]. However, if a destination is selected, this key changes to [Clear Selection].

• You can cancel a selection by selecting the destination again.

• To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to [Select All].)

• Back To Top